iHome Satellite Radio ZN14 User Manual

Model ZN10/ZN14  
AM/FM for your Zune®  
FM  
 
quick start  
1:power  
2:antenna  
3:insert  
Attach AC adaptor plug to  
jack on back of the unit and  
plug the other end into a  
wall socket.  
Snap AM antenna into provided  
stand, then plug antenna cable  
into socket on back of unit.  
Move antenna 12”away.  
Place Zune insert in dock.  
Never dock a Zune without  
the proper insert in place.  
4:Zune  
5:radio  
F
M
InsertaZune® into thedockwith  
proper insert (Zune must not be in  
a skin or case). The Zune will charge  
while docked. Turn the Function  
knob to Zune and press play on your  
Zune to play it .  
Turn the Function knob to AM  
or FM to select AM or FM radio  
band.Turn the Tuning knob to  
desired radio station.  
1
 
Controls and Indicators  
Dock  
Volume Knob  
Power ON LED  
Tuning Knob  
Function Knob  
AM Loop ᕥ  
Antenna socket  
Aux-in Jack ᕦ  
Headphones Jack ᕧ  
EXB switch ᕨ  
AC Adaptor Jack  
FM Antenna  
2
 
Using Your iHome  
Connect Unit to Power Source  
Plug the AC adaptor cable into the AC Adaptor Jack on the back of the unit and the other end into a standard 120VAC  
wall outlet.  
Install Zune Insert  
Your unit comes with a removable insert to ensure your Zune fits properly in the Dock.  
USE PROPER INSERT TO AVOID DAMAGE TO Zune OR UNIT.  
Playing and charging your Zune  
1. Place proper insert for your Zune in Dock, then gently dock Zune. When docked, Zune will charge until fully charged.  
The Zune will not overcharge.  
2. Turn the Function Knob to Zune and press play on Zune to play.  
3. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
4. To switch off the unit, turn the Volume Knob fully counter-clockwise.  
Listening to Radio  
Setting Up Antennas  
1. Snap AM loop antenna into provided stand, then plug antenna cable into the AM Antenna socket on back of the unit.  
Move antenna 12” away from the unit and rotate it for best reception.  
2. Extend FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antenna.  
Tuning and Playing the Radio  
1. Turn the Function Knob to AM or FM to select AM or FM radio band.  
2. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
3. Turn the Tuning Knob to tune radio to the desired station.  
4. To switch off the unit, turn the Volume Knob fully counter-clockwise.  
Using the Aux-in Jack  
1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your nondocking Zune or other  
audio device and the other end of the patch cord into the Aux-in Jack located on the back of the unit.  
2. Turn the Function Knob to AUX.  
3. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
4. To switch off the unit, turn the Volume Wheel fully counter-clockwise.  
Using the Headphones Jack  
1. Plug your headphones into the Headphones Jack located on the back of the unit for private listening to any selected  
function (Zune, radio or aux). Speaker output is disabled when headphones are plugged in.  
2. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
3. To switch off the unit, turn the Volume Knob fully counter-clockwise.  
3
 
A Consumer Guide to Product Safety  
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.  
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating  
instructions carefully before installation and use, and keep these instructions handy for future reference. Take special  
note of all warnings listed in these instructions and on the unit.  
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,  
laundry tub, swimming pool or in a wet basement.  
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.  
For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.  
Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of  
air through the ventilation openings.  
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances  
(including amplifiers) that produce heat.  
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating  
instructions or as marked on the appliance.  
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the  
unit to where it is plugged into an AC socket.  
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for  
cleaning instructions.  
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any  
openings or vents located on the product.  
8. Attachments Do not use attachments not recommended by the product manufacturer.  
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or  
cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will  
prevent damage to the product due to lightning and power-line surges.  
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:  
A.  
B.  
C.  
D.  
E.  
the power supply cable or plug has been damaged.  
objects have fallen into or liquid has been spilled into the enclosure.  
the unit has been exposed to rain.  
the unit has been dropped or the enclosure damaged.  
the unit exhibits a marked change in performance or does not operate normally.  
12. Antenna – Do not connect an external antenna to the unit (other than that provided).  
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the  
power cable should be unplugged from the unit to prevent damage or corrosion.  
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating  
instructions. Service methods not covered in the operating instructions should be referred to qualified service  
personnel.  
4
 
Troubleshooting  
Possible Problem  
Solution  
Symptom  
Unit does not respond AC adaptor isn’t plugged into a wall outlet or Plug the AC adaptor into a wall outlet and plug the connector into  
the connector is not plugged into the power the supply jack on the unit. Turn Volume knob to turn unit on.  
supply jack on the back of the unit  
Wall outlet is not functioning  
Plug another device into the same wall outlet to confirm the outlet  
is working. If the outlet is controlled by a switch, turn switch on.  
Zune cannot dock  
properly  
Using no or wrong Zune insert  
Zune isn’t installed properly  
Make sure the dock insert is the proper fit to your Zune  
Remove your Zune from the dock and check for obstruction on the  
connectors in the dock and on your Zune. Then reseat it in the dock.  
Zune is playing but  
there’s no sound  
Zune is not installed properly  
Remove your Zune from the dock and check for obstruction on  
the connectors in the dock and on your Zune. Then reseat it in  
the dock.  
Function knob is not set to Zune  
Zune is locked up  
Make sure Function knob is set to Zune  
Please make sure your Zune is working properly before docking  
into the unit. Please refer to your Zune manual for details.  
Remove your Zune from the dock and check for obstruction on  
the connectors in the dock and on your Zune. Then reseat it in  
the dock.  
Zune didn’t charge  
Sound is distorted  
Zune is not installed properly  
Zune is locked up/frozen  
Zune battery has problem  
Volume level is set too high  
Sound source is distorted  
Please make sure your Zune is working properly before docking  
into the unit. Please refer to your Zune manual for details.  
Decrease the unit volume and set EXB switch to off  
If Zune original sound source is poor quality, distortion and noise  
are easily noticed with high-power speakers.  
Try a different audio source such as a music CD.  
Plug the AM loop antenna connector to the jack on the back of  
the unit. Move the loop antenna away from the unit. Rotate  
antenna for best reception.  
No AM radio sound  
OR very noisy  
AM radio sound  
AM loop antenna is not connected to the  
unit OR is not properly located  
5
 
Solucionando problemas  
Síntoma  
Causa posible  
Solución  
La unidad no  
responde.  
El adaptador de AC no está conectado al  
tomacorriente o el conector no está  
conectado a la ficha en la parte posterior de  
la unidad.  
Conecte el adaptador de AC a un tomacorriente y el adaptador  
a la ficha en la parte posterior de la unidad.  
Gire el control de volumen para encender la unidad.  
El tomacorriente no funciona.  
Conecte otro aparato en ese tomacorriente para verificar si el  
tomacorriente funciona. Si el tomacorriente funciona con un  
interruptor, colóquelo en la posición de encendido.  
El Zune no encastra No ha colocado ningún encastre o ha Verifique que el encastre sea el apropiado para su Zune.  
correctamente.  
colocado el encastre incorrecto para su Zune.  
El Zune no encastró correctamente.  
Quite el Zune del encastre y retire la posible obstrucción del  
encastre o de su Zune. Vuelva a colocar el Zune dentro del  
encastre.  
El Zune está  
funcionando pero no  
hay sonido alguno.  
El Zuneno está instalado correctamente.  
Quite el Zune del encastre y verifique posibles obstrucciones del  
encastre o de su Zune. Vuelva a colocar el Zune dentro del  
encastre.  
El control de función Zune no ha sido Coloque el control de función Zune en la posición Zune.  
seleccionado  
El Zune está trabado.  
Verifique que su Zune funciona correctamente antes de conectarlo  
a la unidad. Refiérase al manual de su Zune para más detalles.  
El Zune no cargó.  
El Zune no está instalado correctamente.  
Quite el Zune del encastre y retire la posible obstrucción del  
encastre o de su Zune. Vuelva a colocar el Zune dentro del  
encastre.  
El Zune está trabado/no responde.  
Por favor asegúrese de que su Zune funciona correctamente  
antes de colocarlo en el encastre. Refiérase al manual de su  
Zune para mayor información.  
La batería del Zune podría tener algún  
inconveniente.  
El sonido sale El volumen se encuentra muy alto.  
distorsionado.  
Baje el volumen de la unidad y coloque el selector EXB en  
apagado.  
El sonido de la unidad sale distorsionado.  
Si el sonido original era de pobre calidad, las distorsiones y ruidos  
se harán más notables con los parlantes de alta potencia. Pruebe  
utilizar otra fuente de audio como un CD de música.  
No se escucha la La antena circular no se encuentra conectada Inserte el conector de la antena circular a la ficha en la parte  
radio AM o el sonido a la unidad o no está ubicada correctamente. posterior de la unidad. Aleje la antena de la unidad. Gire la antena  
de la radio AM sale  
muy distorsionado  
hasta obtener una mejor recepción.  
6
 
Limited 90-Day Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from  
defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.  
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should  
this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies  
will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, packing, return UPS/postage,  
and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service  
Center listed below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase  
is $20.00.  
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries  
are the most common cause of problems encountered.  
If service is still required:  
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.  
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($20.00 without proof of purchase).  
4. Send the unit prepaid and insured, to the Factory Service Center listed below.  
Consumer Repair Department  
SDI Technologies Inc.  
1330 Goodyear Dr.  
El Paso, TX 79936-6420  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which  
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized  
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes  
(if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.  
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original  
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members  
or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive  
damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may  
not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually  
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product.  
Toll Free Customer Service: 1-800-288-2792  
ZN10_ZN14 IB-042407-A  
©SDI Technologies 2007 All rights Reserved  
 
Printed in China  

Graco Inc Plumbing Product 309475F User Manual
Grizzly Automobile Parts H8090 User Manual
Grundig Flat Panel Television 46 VLE 7139 BR User Manual
Haier TV DVD Combo 0090502138 User Manual
Havis Shields Automobile Accessories KK 100 02 User Manual
Honeywell Thermostat CT8602C User Manual
Hotpoint Clothes Dryer TS13 User Manual
Hotpoint Refrigerator HT232I User Manual
Hotpoint Washer Dryer HFEL 521 User Manual
HTC Cell Phone HD7 User Manual