Hauppauge TV Receiver WinTV HVR 4000 User Manual

Select the region that you are  
located in and click Next.  
4. WinTV DVB reception advice  
6. CyberLink Software Installation  
To start the software installation, click Start / Run then type your CD-  
ROM drive letter (for example: D:\) and then Setup.exe.  
DVB-T (WinTV-HVR-4000 only)  
Please ensure that you have a suitable TV aerial connected to the  
WinTV card. You should then ensure you are located in a area that  
supports Digital Terrestrial TV by visiting:  
Click Next and follow the on  
screen instructions to install the  
software.  
WinTV-HVR-4000  
www.dtg.org.uk/retailer/coverage.html and entering your post code.  
WinTV-NOVA-HD-S2  
If your area does have digital Terrestrial TV coverage, please check  
your TV antenna as most antenna’s that are over 8 years old may not  
support the Digital Terrestrial TV broadcasts and you may need to  
update yours to a ‘Wideband or Highgain’ antenna.  
Quick Installation Guide  
Once the installation is complete,  
please re-start your computer.  
for Windows XP / Vista 32-bit  
© 2007 Hauppauge Computer Works · QI-WINTV-SC-V1.1-ENG · 2007/06/25  
Select the signal type that you  
Tech Support: (+44) 0207 378 0202  
Telephone: (+44) 0207 378 1997  
Fax: (+44) 0207 357 9171  
want to configure and click Next.  
Hauppauge Computer Works, Ltd.  
DVB-S/DVB-S2  
10 Borough High Street  
Bank Chambers  
Scanning for DVB-S channels will  
also scan for HD DVB-S2 channels.  
Select the location where you  
want to save recorded TV files  
and click Next.  
Please ensure that your satellite dish is correctly aligned and the Sat  
cable is connectly directly from the LNB and not via a set top box.  
London, UK, SE1 9QQ  
5. Install the WinTV Windows driver  
Tech Support: (+1) 631 434 3197  
Telephone: (+1) 631 434 1600  
Fax: (+1) 631 434 3198  
Hauppauge Computer Works, Inc.  
91 Cabot Court  
Hauppauge, NY 11788  
7. CyberLink PowerCinema  
ote: If you have any anti-virus software enabled, please dis-  
able it during the installation of the software.  
N
To start the PowerCinema application double click on the CyberLink  
PowerCinema Icon on your desktop or click on Start / All Programs /  
CyberLink PowerCinema / PowerCinema.  
Tech Support: (+65) 276 4412  
Telephone: (+65) 276 9163  
Fax: (+65) 276 9167  
Hauppauge Digital Asia, Pte. Ltd.  
Blk 1093, Lower Delta Road #04-05  
Tiong Bahru Industrial Estate  
Singapore 169204  
Start your computer, the Found  
New Hardware Wizard will  
appear, Click on Cancel.  
The Setup Wizard will appear  
which will guide you through the  
setup and configuration of the  
application, click Next.  
TV Setup (WinTV-HVR-4000 only)  
If you have a cable system con-  
nected click on Scan Channels, if  
you do not then click Next and  
Scan Channels for scanning TV  
antenna channels.  
1. Contents of the WinTV-package  
WinTV-HVR-4000 or  
WinTV-NOVA-HD-S2 PCI board  
Remote control transmitter with  
2 AAA batteries  
Remote control receiver  
Insert your WinTV Installation CD-  
Select the type of screen that you  
are using (4:3 is normal TV /  
Monitor screen size and 16:9 is a  
widescreen TV / Monitor) and  
click Next.  
with velcro dot fastener  
ROM and click on Start then  
Once the channel scan is finished  
click on Next.  
FM Radio antenna  
(WinTV-HVR-4000 only)  
S-Video/Composite Adapter  
(WinTV-HVR-4000 only)  
Installation CD-ROM with:  
· CyberLink PowerCinema 5.1  
Computer, you should then see  
the HCW3_x CD, double click on this CD-ROM then double click on the  
file called HCWDriverInstall.  
WinTV-HVR-4000  
You will then be presented with a blue screen which will begin  
installing and updating the drivers for your product.  
2. Installing the WinTV-board  
ote: Your PC could be damaged by electrostatic discharge.  
Avoid this by contacting the earthed chassis of your PC,  
Select the type of speaker setup  
that you are using and click Next.  
Digital DVB-T Setup  
N
before you open it or touch the PCI card.  
(WinTV-HVR-4000 only)  
To install, switch off the computer and remove the computer cover. The  
manufacturer of your PC supplies instructions on removing the PC cover.  
Select Scan Channels to start the  
channels scan.  
When complete click on Next.  
Locate a free PCI slot (a short white slot). Unscrew and remove the  
metal cover plate which covers the back of the empty slot.  
Plug the WinTV board into the PCI slot, and screw the WinTV metal  
You will now need to check that  
the drivers are installed correctly.  
Right Click on My Computer and  
Left Click on Properties.  
Click on Hardware tab and then  
Device Manager.  
In the Device Manager click on  
the + symbol on the Sound  
Video and Game controllers sec-  
tion. If the driver is installed cor-  
rectly you should see the  
Hauppauge WinTV.  
cover plate to the PC.  
3. Connections of the WinTV-board  
PowerCinema detect the TV  
tuners.  
The WinTV-HVR-4000 has a  
Hybrid tuner and can be config-  
ured for all types of signals:  
WinTV-HVR-4000  
The DVB-T EPG allows you to  
view now and next channel pro-  
gram information, refer to the  
online help for more information.  
With the HVR you can watch and record analog TV, DVB-Terrestrial,  
DVB-Satellite and DVB-S2 HD channels. You can also connect sources  
via the composite and S-Video inputs and listen to FM Radio as well.  
1.Analogue (Cable TV and  
Antenna)  
You can now connect the leads provided to the WinTV-HVR-4000 in  
the following order.  
Click on Next.  
2.DVB-T (Digital Terrestrial)  
3.DVB-S (Digital Satellite)  
and DVB-S2 (Digital Satellite HD)  
In addition you can also connect  
a composite or S-Video source (Hi-8 camcorder, VCR, cable or satel-  
lite box).  
The WinTV-NOVA-HD-S2 has a HD satellite tuner and can be config-  
ured for DVB-S (and HD DVB-S2) only.  
FM  
TV  
FM Radio-Antenna  
TV-Antenna  
If any of them have a yellow exclamation mark, follow this procedure:  
1.Close Device Manager  
2.On the Hauppauge Installation CD-ROM double click on the file  
called HCWclear.exe and select the last 2 options and click on OK.  
3. Once the black screen has closed down, re-start the computer and  
continue from page 3 above or contact our technical support  
department.  
SAT  
SAT-Cable from the LNB of your satellite dish  
S-VIDEO IN S-Video-Input *  
LINE IN  
IR  
Stereo-Audio-Input, from the output of your source  
Input for the Infra-red-Sensor  
ote: for using a RCA Yellow Phono composite input you  
must use the supplied S-Video to composite adapter.  
You need to ensure that you have connected the cables correctly  
before performing a channel scan.  
You can configure or change the signal input by selecting Settings /  
TV / Signal settings.  
N
WinTV-NOVA-HD-S2  
With the WinTV-NOVA-HD-S2 you can watch and record DVB-Satellite  
and DVB-S2 HD channels.  
You can now connect the leads provided to the WinTV-NOVA-HD-S2  
in the following order.  
SAT  
IR  
SAT-Cable from the LNB of your satellite dish  
Input for the Infra-red-Sensor  
 
Page 2  
Page 3  
Page 4  
Page 1  

Hamilton Beach Blender 840119400 User Manual
Hearth and Home Technologies Stove CB1200I B User Manual
Heath Zenith Home Safety Product 5718 User Manual
Heath Zenith Home Safety Product SH 5512 User Manual
HP Hewlett Packard Computer Drive B6960 90078 User Manual
HP Hewlett Packard Fish Finder 5345A User Manual
Hyundai Car Video System H CDM8042 User Manual
IBM Film Camera 5074 User Manual
iHome Speaker System iHM10 User Manual
Image Treadmill IMTL491050 User Manual