™
™
BUZZSAW
IMPORTANT
If you pull on the Buzzsaw™ handle and it does not move, do not
force the handle back: a Ballistic Ball is stuck in the blaster.The
blaster will not fire when you depress the trigger.
Try doing one or both of the following:
• Feed an additional ball into the loading tube: this may dislodge the
stuck ball.
• Insert the eraser end of an unsharpened pencil into the barrel of the
blaster, pushing the stuck ball back until it clears the launching wheel.
Now try again to pull the handle and fire a ball.
Also note that you should never pull back on the handle with
excessive force: doing so, over time, may damage the blaster.
© 2006 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
52831
PN 6633260000
|