Harbor Freight Tools Scale 96823 User Manual

130 pound  
electronic scale  
Model 96823  
operation instructions  
Visit our website at: http://www.harborfreight.com  
read this material before using this product.  
Failure to do so can result in serious injury.  
saVe this Manual.  
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools. Diagrams within this  
manual may not be drawn proportionally. Due to continuing improvements, actual  
product may differ slightly from the product described herein. Tools required for  
assembly and service may not be included.  
For technical questions or replacement parts, please call 1-800-444-3353.  
Revised Manual 09j  
 
power cord safety  
1. If an extension cord is used,  
a. the marked electrical rating of the (detachable power supply cord or)  
extension cord should be at least as great as the electrical rating of the  
appliance,  
b. if the appliance is of the grounded type, the extension cord should be a  
grounding type 3-wire cord.  
c. the longer cord should be arranged so that it will not drape over the counter  
top or tabletop where it can be pulled on by children or tripped over.  
general safety  
1.  
Have battery replaced only by a qualified service technician. Do not replace with  
a battery of a different type or charge level.  
2.  
3.  
Recycle the battery as required by State, Local, and Federal regulations.  
this scale is not intended for commerce or trade purposes. readings are  
for personal/household use only.  
4.  
The use of accessory attachments not recommended by the appliance  
manufacturer may cause injuries.  
5.  
6.  
7.  
Do not use appliance for other than intended use.  
Do not exceed the maximum weight capacity of 130 Pounds.  
Maintain labels and nameplates on the appliance. These carry important  
safety information. If unreadable or missing, contact Harbor Freight Tools for a  
replacement.  
8.  
This product is not a toy. Keep it out of reach of children when children are not  
being closely supervised.  
9.  
Do not use Scale to weight a person or an animal.  
10.  
The warnings, precautions, and instructions discussed in this instruction manual  
cannot cover all possible conditions and situations that may occur. It must be  
understood by the operator that common sense and caution are factors which  
cannot be built into this product, but must be supplied by the operator.  
saVe these instructions.  
SKU 96823  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
speciFications  
Electrical Requirements  
Working Temperature  
120 V~ / 60 Hz  
14°~104° F (-10°~+40° C)  
< 90% Relative Humidity  
Power Cord  
Battery  
18 AWG X3C SVT X 6FT  
6 Volt lead-acid Battery (included)  
0.88 to 130 Pounds ± 0.001 Pound  
(400g to 60 Kg ± 0.5g)  
Capacity/Accuracy  
household use onlY  
unpacking  
When unpacking, check to make sure that the item is intact and undamaged. If any  
parts are missing or broken, please call Harbor Freight Tools at the number shown on the  
cover of this manual as soon as possible.  
asseMbling  
1.  
2.  
3.  
Plug the wires threaded through the Support Tube (4) into the Base (6).  
Secure the Support Tube to the Base using Hex Bolts (5).  
Plug the wires at the top of the Support Tube into the Display (1), slide the  
Display onto the top of the Support Tube, and secure with the Hex Nut (2) and  
Hex Bolt (3).  
cleaning  
read the entire iMportant saFeguards section at the beginning of  
this manual including all text under subheadings therein before set up or  
use of this product.  
risk oF shock!  
Warning  
before cleaning appliance, make sure the appliances switch  
is turned off and the cord is unplugged.  
do not immerse motor/heating element, cord, or plug in  
water or any other liquid.  
1.  
2.  
Wipe down the non-electrical parts of the unit before use with a mild detergent  
and dry with a soft cloth.  
Allow unit to dry completely before assembly or use.  
SKU 96823  
For technical questions, please call 1-800-444-3353.  
Page 4  
 
operation  
read the entire iMportant saFeguards section at the beginning of  
this manual including all text under subheadings therein before set up or  
use of this product.  
iMportant! this scale is intended for private use only, it is not legal for trade.  
1.  
2.  
Clean the appliance before each use as explained in the Cleaning section.  
Place the Scale on a firm, level surface capable of bearing the weight of the unit  
and the items being weighed. If necessary, adjust  
the legs of the unit to level it.  
3.  
4.  
Plug the Electrical Cord (8) into the receptacle  
on the back of scale (as shown in photo at  
right). Insert the plug end into a standard 120V  
electrical outlet. It will take approximately 8  
hours for the internal battery to fully charge.  
When fully charged, the electrical cord can be  
disconnected, if scale needs to be transported  
from place to place. The scale will also operate  
with the electrical cord left plugged in.  
5.  
6.  
7.  
Turn the toggle switch on the back of the display  
to the on position..  
If the unit does not revert to zero, push the Zero  
button to reset the Scale.  
Gently place the item to be weighed on the Scale platform. Do not exceed  
maximum weight capacity of 130 pounds. The weight of the item placed on the  
Scale will appear on the display.  
8.  
When weighing powders or liquids.  
a. Place the empty container on the Scale platform. Press the tare button.  
The digital display will return to zero, ignoring the weight of the container. A  
“0 ” readout will appear on the display.  
b. Pour the powder or liquid in the container. The weight of the product will  
appear on the digital display.  
9.  
Numbers can be typed in representing a value for the product being weighed, (for  
estimation purposes only).  
10.  
To nd the total for several such calculations, push the add button after each  
item is weighed and the estimated value is entered. The total will appear in the  
Total Window.  
SKU 96823  
For technical questions, please call 1-800-444-3353.  
Page 5  
 
11.  
12.  
Press the clr button to erase all values from the screen.  
To prevent accidents, turn off the appliance and disconnect its power supply after  
use. Moving the Scale, as a general rule, is not recommended.  
13.  
Any calibration of the Scale should only be done by a qualified service technician.  
inspection and Maintenance  
before appliance inspection or maintenance, make sure the  
appliances switch is turned off, the cord is unplugged, and  
Warning  
the unit has cooled completely.  
do not use damaged appliances. if abnormal noise or  
vibration occurs, have the problem corrected before further  
use.  
1.  
beFore each use, inspect the general condition of the appliance. Check for  
proper connection to an AC outlet.  
SKU 96823  
For technical questions, please call 1-800-444-3353.  
Page 6  
 
please read the FolloWing careFullY  
THE MANUFACTURER AND/oR DISTRIBUToR HAS PRoVIDED THE PARTS LIST AND ASSEMBLy  
DIAGRAM IN THIS MANUAL AS A REFERENCE TooL oNLy. NEITHER THE MANUFACTURER oR  
DISTRIBUToR MAKES ANy REPRESENTATIoN oR WARRANTy oF ANy KIND To THE BUyER THAT  
HE oR SHE IS qUALIFIED To MAKE ANy REPAIRS To THE PRoDUCT, oR THAT HE oR SHE IS  
qUALIFIED To REPLACE ANy PARTS oF THE PRoDUCT. IN FACT, THE MANUFACTURER AND/oR  
DISTRIBUToR EXPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHoULD BE  
UNDERTAKEN By CERTIFIEDAND LICENSED TECHNICIANS, AND NoT By THE BUyER. THE BUyER  
ASSUMES ALL RISK AND LIABILITy ARISING oUT oF HIS oR HER REPAIRS To THE oRIGINAL  
PRoDUCT oR REPLACEMENT PARTS THERETo, oR ARISING oUT oF HIS oR HER INSTALLATIoN  
oF REPLACEMENT PARTS THERETo.  
parts list & asseMblY diagraM  
part  
description  
Qty  
1
1
2
3
4
5
6
7
8
Display  
Nut M6  
1
Hex Bolt M6x25  
Support Tube  
Hex Bolt M6x16  
Base  
1
1
4
1
Base Cover  
1
120V Electrical Cord  
1
8
7
SKU 96823  
For technical questions, please call 1-800-444-3353.  
Page 7  
 
liMited 90 daY WarrantY  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this product  
is free from defects in materials and workmanship for the period of 90 days from the date  
of purchase. This warranty does not apply to damage due directly or indirectly, to misuse,  
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,  
improper installation, normal wear and tear, or to lack of maintenance. We shall in no event  
be liable for death, injuries to persons or property, or for incidental, contingent, special  
or consequential damages arising from the use of our product. Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitation  
of exclusion may not apply to you. THIS WARRANTy IS EXPRESSLy IN LIEU oF ALL  
oTHER WARRANTIES, EXPRESS oR IMPLIED, INCLUDING THE WARRANTIES oF  
MERCHANTABILITy AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the complaint  
must accompany the merchandise. If our inspection verifies the defect, we will either  
repair or replace the product at our election or we may elect to refund the purchase price  
if we cannot readily and quickly provide you with a replacement. We will return repaired  
products at our expense, but if we determine there is no defect, or that the defect resulted  
from causes not within the scope of our warranty, then you must bear the cost of returning  
the product.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
record products serial number here:  
note: If product has no serial number, record month and year of purchase instead.  
note: Some parts are listed and shown for illustration purposes only, and are not avail-  
able individually as replacement parts.  
SKU 96823  
For technical questions, please call 1-800-444-3353.  
Page 8  
 

Graco Baby Accessories PD204226B User Manual
Hafler Stereo Amplifier DH 200 User Manual
Hamilton Beach Slow Cooker 33453 User Manual
HannsG Car Video System HA222 User Manual
Hearth and Home Technologies Outdoor Fireplace CASTLEWOOD 42 User Manual
Honeywell Home Security System GEC User Manual
Honeywell Thermostat TR70 User Manual
Huawei Modem E219 User Manual
IBM Laptop 390E User Manual
IBM Printer 1585 MT 4539 User Manual