Halo Lighting System Indoor Furnishings LZR1200 User Manual

®
LAZER BY HALO  
CONNECTORS (For use with Lazer Track Only)  
LZR200  
Live End Feed with Junction  
Box Cover  
LZR201  
Live End Feed  
For starting a track run at beginning of track.  
For starting a track run at beginning of  
track and when connector is mounted to  
a junction box.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR202  
Floating Canopy and  
Connector Feed  
LZR203  
Adjustable “L” and Straight  
Connector Feed  
Track can be connected to existing outlet  
box located anywhere along the track.  
Comes with canopy cover, connector,  
dead end and mounting hardware.  
To connect two track sections at right angles  
or straight end-to-end. Includes straight and  
right angle covers.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR204  
Conduit Adapter Feed  
LZR205  
Conduit Continuation Feed  
Designed to accept 1/2” trade size conduit  
fitting (not supplied). Use when feeding  
to track through surface conduit system.  
Includes one left feed and one right feed  
to continue a run around obstructions.  
Requires 1/2” trade size fitting (not included).  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR206  
T-Bar Canopy  
LZR208  
Cord and Plug Feed  
For installing track on T-Bar ceilings.  
LZR201 or LZR203 also required.  
10’ three-wire cord with grounded plug.  
Maximum capacity 5 AMPS.  
Finish: White (P)  
Finishes: White (P), Black (MB)  
LZR211  
Flexible Connector Feed  
LZR212  
Mini Connector  
To connect two track sections at any angle  
up to 90° or for connecting wall and ceiling  
mounted track. Can be used as electrical  
feed point.  
For joining two track sections end-to-end.  
LZR212 is not an electrical feed.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR214  
X Connector  
LZR213R  
LZR213L  
Right Handed T Connector  
Left Handed T Connector  
For joining four track sections in an X pattern.  
Can be used as electrical feed point.  
To connect three track sections. Can be used as  
electrical feed point.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
DE112  
Dead End  
Replacement Dead end for Lazer Track ( 6  
included).  
Finishes: White (P), Black (MB)  
NOTE: Unless otherwise stated, Lazer  
connectors are not compatible with Halo  
Miniature Power-Trac.  
COOPER LIGHTING  
335  
 

Graco Air Compressor 334201B User Manual
Graco Baby Carrier 5070 Series User Manual
Great Dane Lawn Mower TCHE48 17KA User Manual
Greenway Home Products Indoor Fireplace MEF2511OK User Manual
Haier Clothes Dryer HDM35 1 User Manual
Hamilton Beach Coffeemaker 45114 User Manual
Harbor Freight Tools Paint Sprayer 43760 User Manual
Hotpoint Dishwasher BFT680 User Manual
Hotpoint Washer WML 520 P G A K User Manual
Humminbird Fish Finder 937C COMBO User Manual