Haier Washer XQG50 S1016 User Manual

Technica specifications  
Model  
XQG50-S1016  
Automatic Drum Washing Machine  
XQG50-S1016  
Item  
Main power  
220V~/50Hz  
10  
0.05P1  
300  
Max working current(A)  
Water pressure(MPa)  
Washing power(W)  
Spining power(W)  
Washing capcity(Kg)  
Spinning speed(rpm)  
Drying power(W)  
Size(high,depth,width)mm  
Table of Contents  
Before using  
Names of parts---------------inside front cover  
Matters needing attention-------------------1-3  
Installation---------------------------------------4-5  
Control panel--------------------------------------6  
Operational functions-------------------------6-7  
700  
5
1000/800/600  
1000  
850550595  
During using  
Program selection-----------------------------8-9  
Weight(Kg)  
78  
Preparations-------------------------------------10  
Washing methods------------------------------11  
Additional information-------------------------12  
Maintenance  
Maintenance-------------------------------------13  
Warning code------------------------------------14  
Trouble shooting--------------------------------15  
Warning-------------------------------------------16  
Wiring circuit-------------------------------------17  
Technical specification------------Back cover  
 
Warning  
Matters needing attention  
Safety  
1.If the supply cord is damaged, it must be replaced by a special cord or assembly available  
from the manufacturer or its service agent.  
1. A separate earthed socket is required for the 2. Pull the plug and not the electric cable  
power supply. After installation of the washing  
machine the power plug must be accessible  
during normal operation.  
when unplugging the washing machine.  
2.If a stationary appliance is provided, with a supply cord and a plug, the instructions shall  
state that the appliance must be positioned so that the plug is accessible.  
Note: this requirement does not apply if the appliance incorporates other means for  
disconnection from the supply.  
3.For washing machines with ventilation opening in the base, do not place directly on carpet  
as it will obstruct the openings.  
4.The instructions shall state that the appliance is to be connected to the water mains using  
new hose-sets and that old-sets should not be reused.  
3. Fuses in the power circuit should be rated for 4. For you safety, dry your hands before tou-  
15A. Contact a washing machine technician or ching the washing machine and wear appro-  
a desiganted service point for power cable  
replacement.  
priate footwear.  
Note: these instructions are not required if the hoses are permanently attached to the  
appliance.  
5.When connecting the washing machine for water supply and drainage, make sure the plug  
is within reach.  
6.Keep the vent outlet at the bottom of the washing machine free from being blocked.  
7.To prevent danger, damaged electrical cables must be replaced by the manufacturer or an  
authorised service agent.  
5. Do not use flammable detergents or dry c-  
leaning agents; do not use flammable sprays  
near the washing machine; do not remove or  
insert the plug in the presence of flammable  
gas.  
6. The door of the washing machine beco-  
mes hot during the water heating or drying  
process. Avoid contact with the door during  
the heating or drying process. For safety,  
keep children away from the washing ma-  
chine.  
7. Do not allow children to play with the packing materials after unpacking.  
16  
1
 
Matters needing attention  
Trouble shooting  
The following circumstances do not constitute problems. Do not contact the maintenance  
service until the problem has been confirmed.  
8.The washing machine must not be used in 9. The washing machine should be placed  
the open or in an area of high humidity as  
water droplets may form on the electrical  
components. Air dry the appliance if the  
washing machine components become wet.  
in a well-ventilated area, leaving a space  
between the appliance and adjacent walls or  
furniture.  
problem  
Possible Cause  
Poor connection to power supply  
Power failure  
The washing machine fails to  
operate  
Door is not closed properly  
Machine has not been switched on  
Water is not turned on  
Water pressure is less than 0.05MPa  
The inlet hose has a kink  
Water supply failure  
The washing machine does not  
fill with water  
10. Keep away from heat sources and direct 11. During installation, ensure that the  
sunlight to prevent plastic and rubber com-  
ponents from ageing.  
electric cable is not trapped by the washing  
machine and damaged.  
Dear customer, For the machine and your  
own security, DO NOTREPAIR IT BY YOUR-  
SELF! DO NOT USE THE WASHING MA-  
CHINE WHICH SOME PARTS ARE LOST!  
The door is not closed properly  
Check that the height of the water hose is within 80-100cm  
Check that the drain hose is not syphoning  
The water supply and drainage  
do not stop  
Drainage hose is blocked  
Drainage failure  
Drainage hose end is more than 100cm above the floor  
level  
Check that all packing bolts have been removed  
The washing machine is located on an uneven surface of  
is not level  
Check that all foam packing has been removed from the  
motor  
Strong vibration during spin  
drying  
Operation stops before com-  
pletion of the wash cycle  
Water of electricity failure  
Use  
1. Make sure that the washing machine is  
securely connected to the water supply. Take door and then close the porthole. Do not shut  
the necessary precautions or contact the lo-  
cal service centre if the connection is poor or  
there is a water leak.  
2. Fasten the door handle before opening the  
The detergent is not a low foam type  
Excessive detergent has been used  
Excessive foam in the drum  
Failure of the drying process  
the door violently.  
Poor connection to the power source  
Door is not closed properly  
Program has not been correctly set  
Check to see if the end of the water drainage hose is  
submerged in water  
Incomplete drying  
The filter is blocked  
The machine is overloaded  
The water tap is not tured on  
2
15  
 
Warning code  
Matters needing attention  
Warning  
Abnorma item  
code  
Checking position and  
ask for help  
3. Never place heavy objects, e.g. a heating  
appliance or water container, on the top panel materials.  
of the washing machine.  
4. Do not wash foam rubber or simalar sponge  
Content of identification Action to take  
The water level can not  
Warning and  
Check if the water  
pressure is low or stops  
supplying  
reach the reset water  
stop running  
level within 5 minutes  
E11  
E12  
Water supply  
The water level can not  
Check if the water  
pressure is low or stops  
supplying  
Warning and  
reach the setting water  
stop running  
level within 8 minutes  
The water level can not  
reach the reset level in  
8 minutes after drainage stop running  
starting  
Check if the water outlet  
of the drainage and  
adjust it and restart the  
machine  
Warning and  
Drainage  
5. Before washing, close zippers, buttons,  
laces and repair damaged areas. Underwear the wash cycle. Otherwise, the water will spilt  
6. Do not open the detergent dispenser during  
and amall items should be palced in a laun-  
dry bag or pillow slip. Do not wash clothes  
containing wire frames.  
out from it and the detergent can not be wash-  
ed out completely.  
The water is above the  
warning level  
Warning and  
stop running  
Ask the technician to  
repair  
E13  
E31  
Water supply  
The feedback signal do-  
es not change in 8 minu-  
tes during the motor runs  
Warning and  
stop running  
Ask the technician to  
repair  
Motor  
Water level is  
abnormal in the setting water level during  
drying process  
The water is ablove the  
Check if the water outlet  
of the drainage and adjust  
it and restart the machine  
Warning and  
stop running  
EA3  
EC1  
the drying process  
No heating and  
washing with  
cold water  
The water temperature  
unchanged in 10 minutes  
Ask the technician to  
repair  
Heater  
7. The door is fitted with a self-locking device 8. After washing, turn off the tap to prevent  
and can be opend when it is under the safety leaking; unplug the washing machine and  
Water tempera- The drying sensor circuit Warning and  
Ask the technician to  
repair  
state ( water should be under the safe level;  
temperature inside the drum should be less  
than 55§; the drum should do not run). Do  
not open the door except above condition  
otherwise the self-locking device will be  
damaged and the operator will get hurt.  
wipe clean the lower part of the porthole.  
EC2  
EC3  
ture sensor  
short cut or open  
stop running  
Water level  
sensor  
The water level sensor  
circuit short cut or open  
Warning and  
stop running  
Ask the technician to  
repair  
Within 30 minutes of dry  
The temperature phase there is 5 minutes Warning and  
Ask the technician to  
repair  
EC4  
of air vent  
in which the temperature stop running  
is not increasing  
The dry tempe- The heater sensor circuit Warning and  
Ask the technician to  
repair  
EC5  
U01  
U02  
rature sensor  
short cut or open  
stop running  
Can not unlock after 4  
times try  
Warning and  
stop running  
Ask the technician to  
repair  
Unlock the door  
9. Keep the door slightly open when the wa-  
10. The tumble dryer should not be used if  
Can not lock the door  
after 4 times try  
Warning and  
stop running  
Ask the technician to  
repair  
Lock the door  
shing machine is not being used. Never cover industraial chemicals have been used for  
the machine a  
plastic sheet.  
cleaning  
Spin low speed  
and cancel  
drying  
The judgement of un-  
balance is above 1000g  
Disperse the clothings  
evenly in the tube  
U03  
Spin lopsidedly  
11. The appliance must not be installed behind  
a lockable door, a sliding door or a door with  
a hinge on the opposite to that of the tumble  
dryer.  
U04  
E22  
Unclose the door The door is unclosed  
Warning  
Close the door  
The memory  
Ask the technician to  
repair  
EEPROM goes wrong  
function is failure  
Warning  
14  
3
 
Installation  
Maintenance  
1. Remove the power plug, open the porthole  
and turn off the tap after washing to avoid to  
produce damp and strange smell in the drum.  
If the washing machine is not going to be used chine and rube apares. Only  
for a long period of time, put the drainage hose the clothing soaked with some  
as lower as possible to let the water in the pipe soap liquid is suggested.  
out for avoiding the water turns bad quality and Warning: Remove the power  
2. The dissolved agent and anti-  
septics should not be used to  
clean the surface of the ma-  
As shown in Fig.1, remove all the packing materials  
( in cluding the foam base ). It is normal that there are  
some water drops on the plastic bag, the cushion and  
the porthole. It is because of the water testing before  
leaving the factory.  
Fig.1  
then put the pipe to the original place.  
socket before the cleaning.  
Check attachments and materials  
3. Clean the detergent  
cartridge regularly:  
Pull the detergent cartridge  
up and out then wash it out.  
Put it back when it is clean.  
4. To prevent blockages to the  
water supply or the ingress of  
contaminants, clean the water  
inlet and inlet water filter  
regularly.  
Operational Quality  
Water  
hose  
Drain  
holder  
Plastic  
plugs  
Name  
manual  
certificate  
5. Clean the filter ( once a month )  
Press the lower edge of the filter compartment  
cover to open; ( Fig.1-2 )  
Remove the filter by turning counterclockwise;  
( Fig.3 )  
Flash clean with running water;  
Filter replacement is the reverse of removal.  
Caution: Attention shall be paid to ensure that  
the filter is replaced correctly to avoid possible  
leakage.  
Using a flat-nose screw driver prizes the slits  
of two ends of the button panel and move the  
panel out with your hands. ( Fig.4-5 )  
6. If the machine is to be moved a distance  
location, replace the vibration mounting locks  
which were removed during installation as  
shown below.  
Quantity  
1
1
1
1
3
Remove the packing screws as shown in Fig.2.  
The packing bolts protect the appliance from impact damage during  
transportation. Follow the steps below before using the appliance.  
1. Remove the rear panel of the washing machine;  
2. Remove the three packing bolts from the rear panel of the washing  
machine, the rubber hose and then the shock ablorption steel channel;  
3. Refit the back plate;  
Replace the  
rubber plugs  
Remove the  
back cover  
4. Fill the holes left by the packing bolts with plastic plugs.  
( Attention: the packing bolts and rubber hose should be kept in a  
safe place for later use )  
Insert the channel  
steel vibration locks  
insert the bolts  
Tighten the bolts  
with a spanner  
There is a plastic jacket packing the door catch, please remove it  
when you unpack the machine. Do not let children touch it to void  
dangerous things.  
Fig.1  
Fig.2  
Fig.3  
Fig.2  
Adjusting the position of the washing machine.  
Fig.4  
Fig.5  
Replace the back cover  
The washing machine is provide with adjustable feet. Before use,  
adjust the feet until the appliance is level, as shown in Fig.3.  
7. Remove the power plug and turn off the tap and open the door if the machine is not going  
to be used for a long period of time. With the method there would not be any bad smell inside  
the tube.  
Fig.3  
4
13  
 
Installation  
Additional information  
Connection of water inlet hose and washing machine  
( Using new hose-set and old hose-set should not be reused. )  
Tips  
water inlet hose nut  
Adding the soften agent can help the laundry to get rid of the static electricity and  
make the cloths feel softly and easy to iron.  
Place the water inlet hose nut on the connector  
of the water inlet valve.  
The following list shows the drying time for the different quantity and kinds of the  
laundry. You can select the expected drying program in accord with the quantity  
and the drying degree. The selected program will be over when the drying process  
is finished.  
Slightly shake the water inlet hose nut to see  
if it is tightly and properly fixed.  
connector of water inlet valve  
Water drainage hose  
The height of the terminal of the water drainage hose  
should be between 80-100cm. The water drainage  
hose must be securely placed on the clip on the back  
of the washing machine.  
Weight of laundry  
( Kg )  
Remain time  
( min )  
Time for drying  
Standard  
Drying degree  
Use the water drainage support supplied as an acce-  
ssory for proper installation of the water drainage hose.  
Fix the water drainage hose support with waterproof  
string. Do not use an excessively long water drainage  
hose and contract the authorized technician if the water  
drainage hose needs to be extended. The water drainage  
hose should not be extended more than 250cm ( longer  
extension will result in concurrent water inflow and outflow ).  
The diameter of the extension hose should be the same as  
the original hose.  
0-1  
59  
Dried  
Dried  
1-2.5  
120  
0-1  
Dried  
Caution: Water drainage hose must not be immersed in water.  
The original and extension hoses should be tightly connected.  
60min  
30min  
60  
30  
1-2.5  
0-2.5  
For ironing  
Connection of power supply  
Dry and  
anti-becterium  
program  
Check the following items before connection to the power supply.  
The socket conforms to the maximum power load ( The maximum current  
load of the socket and power supply cable should not be less than 15A ).  
Power supply voltage conforms to the required value.  
The power supply socket and the plug of the washing machine compatible,  
if they are compatible, refer to a washing machine technician or a designat-  
ed service point for power cable replacement. The washing machine should  
be connected to the earth before use.  
12  
5
 
Control panel  
Installation  
Reference loading  
Laundry loading  
Door lock  
Remaining time:Min  
Water level  
Overalls  
(cotton 950g)  
Jeans  
(800g)  
START  
PAUSE  
WATER  
LEVEL  
Standard  
Habit  
Quick  
Night  
Heavy  
Delicate  
DELAY  
TEMP  
PREWASH  
Evenly load the laundry in the  
washing machine and then  
tightly close the door of the  
washing machine.  
Pajamas  
(200g)  
Blended  
(fabric clothes  
800g)  
Standard  
60min  
30min  
POWER  
ON/OFF  
00  
rpm  
Min  
Time  
Shirts  
(300g)  
PROGRAMME  
WASH  
RINSE  
DRAIN  
DRY  
Shirt  
(cotton 300g)  
Underwear  
(blended fabrics 70g)  
Notice:  
1) When first using the  
Jackets  
(cotton 800g)  
Socks  
(blended fabrics 50g)  
washing machine, let it run  
unloaded for one program to  
prevent the laundry from being  
tainted by oil or dirty water from  
the washing machine.  
Woolen  
(blankets 3000g) sheets  
(cotton 800g)  
Single bed  
A. POWER ON/OFF  
Touch this button to swith on the power if the machine is not on power, and touch this  
button to switch off the power if the machine is on power.  
2) Do not overload the washing  
machine.  
B. PROGRAMME  
Touch this button then you can select the washing programs as you wish from top to  
bottom in proper order. The backlight is bright while the program is selected. The  
machine will carry out the standard program if there is no program to be selected.  
Attention: The machine has the memory function for the "Habit" program.  
Put detergent in the cartridge  
C. DRY  
There are three partitions in the detergent cartridge:  
Partition 1 : It is used for the prewash function.  
Partition 2 : Put the detergent in this partition no  
matter whether the prewash function is selected or not.  
Partition 3 : Put the softening agent in this partition if the  
launry has gone through the soften process.  
The sequence of the dry program as follow as each time the button is touched after the  
washing program is set:  
Whole auto dry program.  
The standard program for the individual dry.  
At this moment you can select either 60 min or 30 min program.  
You can not select dry function while you have already selected the heavy or delicate  
program.  
Caution: 1) Do not add liquid degergent into partition 1 and partition 2  
2) For prewashing program, detergent should be added to both partition 1  
and 2; for other programs, do not add detergent to partition 1  
Attention: The maximal quantity of the laundry is 2.5Kg if the dry function is selected.  
3) Do not overuse softening agent as this may damage artificial fabrics  
D. DRAIN  
The different spinning speed can be selected by touching this button. For details please  
see the program setting guide.  
The spinning speed is 1000rpm ( 800rpm for night washing ) if the dry function is  
selected.  
Washing program setting  
Set the washing program correctly in accordance with the laundry load.  
First connect the mains and depress the power on/off button, the machine will work on  
the defaulted standard program. Depress the program selection button for the required  
washing program.  
E. RINSE  
Touch this button to select the rinsing time. The time is changeable each time when it is  
touched and 6 times are the maxim.  
Notice: The above operation should be under the condition of no power down. The ma-  
chine will continue its previous program if the machine has the memory function after  
the power down. The memory function can be canceled by turning off the power and  
restart it.  
F. WASH  
Touch this button to select the washing time. Increasing the washing period each time  
this button is pressed. The increasing step is one minute for one press.  
6
11  
 
Preparations  
Operational functions  
G. DELAY  
Power supply  
Water supply  
Setting the finished time of the scheduled washing by touching this button. The defaulted  
time for the scheduled washing is 9 hour. The washing time can be increased one hour by  
one touching of the button. If the button is pressed and held the time can be varied from 1  
to 24 hour cyclically till the button is released. If the START/PAUSE button is pressed the  
current setting is confirmed after the scheduled washing program is ready.  
If the time for the washing program is longer than the time of the scheduled washing then  
the program will work immediately after the START button is pressed.  
Attention: There are some different between the setting time and actual time because of  
the water temperature, water pressure and the distributions of the laundry in the tube.  
There is no scheduled washing function for "Delicate" program.  
Plug in the power supply  
220V/50Hz  
Turn on the tap ensure that the  
water is clear.  
Caution: Before starting the  
washing machine turn on the  
water faucet to ensure that the  
water faucet and the water inlet  
hose are connected correctly and do not leak.  
Detergent selection  
Laundry treatment  
The washing result depends on the  
quality of the detergent except the  
function performances of the washing  
machine. There are many brands of  
detergent in the market. For the best  
washing result, we suggest you using  
the special on-form detergent that  
produced for the auto drum washing  
machines.  
For washing the wool and the chemi-  
cal fibre please use the special deter-  
gent for those materials. Do not use  
dry-clean dissolvent.  
Attention: Only put the quantity of the  
detergent in the cartridge for one time.  
Sort out clothes according to type and extent  
of dirt. There are three types of clothes:cotton,  
synthetical and woolen ( silk ) fabrics.  
Separeate white clothes from colored. If whites  
and coloreds are combined for one load, make  
sure the coloreds are coloreds are colorfast.  
H. Remaining time: Min ( Digital display screen )  
This display unit is used for warning the washing time left and fault information. It can  
display the setting time of scheduled washing and heating temperature. The screen only  
display the hour if the time setting is over 10 hour.  
I. TEMP ( Children lock )  
Touch this button to set washing temperature. The temperature is changed cyclically each  
time the button is pressed. For the highest temperature setting of each program, please see  
the program setting guide. The "Delicate" program there is no temperature setting function.  
To lock button on the control panel by pressing this button for 3 second, which including  
the POWER button. These can be unlocked if thise button is pressed for another 3 second.  
- Remove all objects from pockets that may cause  
damage to the machine, such as keys and coins.  
J. PREWASH  
- Clothing with frayed edges or yarns should be  
put in a wash bag or special bag before washing.  
- Repaier damaged clothing, lose buttons or  
damaged zips and hooks efore washing.  
- Bed sheet and table ware should be loosely  
loaded and not folded.  
This washing machine is for household use and  
designed for mechanically washable clothes.  
When washing, separate unwashable clothes  
with reference to clothes labels.  
The prewash function can be added into the washing program.  
K. WATER LEVEL  
The related time and water level in the drum can be selected by pressing this button in  
accord to the laundry quantity. The more bright the indicate light the more high the water  
level in the drum and the default washing time is longer with this height. The quantity  
indicator changes its position accordingly each time the laundry quantity button is pressed.  
We suggest using the first gear when the quantity is less than 1 Kg. And using the second  
gear when the quantity is less than 2.5 Kg. And using the last gear when the quantity more  
than 2.5 Kg. All other program setting indicate the default values when the laundry quantity  
is set. For each setting range please see the program setting for reference. The default  
program will be carried out if the function is not selected.  
Wash load  
L. Door lock indicator  
This lamp is light when the door is locked and the machine is in the operation state and the  
door can not be opened. If the condition for opening the door is met, press the START  
/PAUSE button this lamp is off and the door is unlocked and the door can be opened.  
Non-fade  
cottons  
Type  
Delicat fabrics Woolen fabrics Blending fabrics  
M. START/PAUSE  
Max load  
5kg  
2kg  
1kg  
2.5kg  
The set program is carried out while this button is pressed. To pause the current program,  
just press this button and the program will not operate at the moment. Pressing this button  
again if you want to resume the operation. The program can not be reset in the process of  
running or pause state. Turning off the power and turning on it again if you want to reset  
programs.  
10  
7
 
Program selection  
Program selection  
Program and washing time  
The methods for using detergent  
Partition1 Partition2 Partition3  
Program and washing time  
Wash ( min ) Rinse ( time )  
Total time consume  
( min )  
Program  
name  
Suitable  
condition  
Drain ( rpm )  
Temp ( ¤& )  
Option  
/
Quantity  
Default  
Range  
/
Default  
Range  
Default  
Range  
/
Default  
Range  
/
Default  
/
Range  
/
add 12 minutes  
washing  
Prewash  
Standard  
for dirty cloth  
below 5 kg  
/
/
/
/
wash/rinse  
/spin  
wash/rinse  
/spin/dry  
wash/rinse  
/spin/dry  
wash/rinse  
/spin  
wash/rinse  
/spin/dry  
wash/rinse  
/spin/dry  
800  
0/600/800/1000 cold  
0/600/800/1000 cold  
cold/30/40/60/90  
cold/30/40/60/90  
59  
7-185  
7-299  
below 5 kg  
below 2.5 kg  
below 1 kg  
below 5 kg  
25  
21  
17  
5-60  
5-60  
5-60  
3
2
2
0-6  
0-6  
0-6  
ordinary cloths  
washing  
1000  
168  
1000  
800  
0/600/800/1000 cold  
0/600/800/1000 cold  
0/600/800/1000 cold  
0/600/800/1000 cold  
cold/30/40/60/90  
cold/30/40/60/90  
cold/30/40/60/90  
cold/30/40/60/90  
103  
59  
7-235  
7-185  
7-299  
7-235  
self defined  
washing program  
according to the below 2.5 kg  
habit of the  
operator  
25  
21  
17  
5-60  
5-60  
5-60  
3
2
2
0-6  
0-6  
0-6  
Habit  
Quick  
1000  
1000  
168  
103  
below 1 kg  
wash/rinse  
/spin  
800  
0/600/800/1000 cold  
cold/30/40/60  
32  
7-168  
below 5 kg  
below 2.5 kg  
below 1 kg  
below 5 kg  
8
6
5-60  
5-60  
5-60  
5-53  
2
2
2
3
0-6  
0-6  
0-6  
0-6  
wash/rinse for not very dirty  
1000  
1000  
0/600/800/1000 cold  
0/600/800/1000 cold  
cold/30/40/60  
cold/30/40/60  
151  
89  
7-282  
7-218  
/spin/dry  
wash/rinse  
/spin/dry  
wash/rinse  
/spin  
cloths  
5
25  
800  
800  
800  
600  
0/600/800  
0/600/800  
0/600/800  
0/600  
cold  
cold  
cold  
cold  
cold/30/40/60  
cold/30/40/60  
cold/30/40/60  
cold/30  
67  
184  
118  
62  
7-177  
7-292  
7-228  
7-164  
wash/rinse  
/spin/dry  
wash/rinse  
/spin/dry  
Night  
for night washing below 2.5 kg  
below 1 kg  
20  
15  
40  
5-53  
5-53  
5-60  
3
3
3
0-6  
0-6  
0-6  
wash/rinse  
/spin  
for thick or heavy  
below 5 kg  
cloths  
Heavy  
wash/rinse  
/spin  
cashmere and  
wool fabrics  
dry the ordinary  
below 2.5 kg  
laundries  
dry the ordinary  
below 2.5 kg  
laundries  
Delicate  
Standard  
60min  
below 2 kg  
6
1-15  
2
/
0-6  
600  
0/600  
cold  
cold  
29  
120  
60  
3-82  
120  
60  
dry  
dry  
dry  
120  
60  
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
anti-virus process  
for dried laundry  
30min  
below 2.5 kg  
30  
/
/
30  
30  
Notice:  
indicates that softener or bleach can be added if needed  
indicates that detergent must not be added  
indicates that detergent must be added  
Attention: The above list is just for your reference since the temperature, water pressure and function you  
selected may verify for different laundry.  
8
9
 

Greenheck Fan Fan LFC User Manual
Haier Saw HRF 220 User Manual
Hans Grohe Plumbing Product 06593000 User Manual
Harman Kardon Digital Camera HKTS1 User Manual
HP Hewlett Packard Calculator HP OmniBook User Manual
HP Hewlett Packard Photo Printer A520 Series User Manual
Hunter Fan Outdoor Ceiling Fan M0006 01 User Manual
IBM Network Card DS4000 FC User Manual
IKEA Indoor Furnishings AA 31875 2 User Manual
Impex Home Gym PHE 9000 User Manual