HP Hewlett Packard Printer 130R User Manual

HP Designjet 130 Printer series  
Printers for creative professionals—the affordable  
HP Designjet 130 multi-format printing systems create  
fade-resistant, photo-quality images with consistent colors  
for professional photos, prints and proofs.  
Color images that last  
Postcards to posters  
• Fade-resistant, photo-quality images. Proprietary  
dye-based HP Vivera inks are carefully engineered  
to work flawlessly with all parts of the printing  
systems so you achieve rich, vibrant color and  
extraordinary photo image quality with exceptional  
• Ideas big and small—no more cutting and pasting.  
The standard tray holds up to 70 sheets as small as  
a postcard or as big as a poster (18 x 24 in). Extra-  
wide front and rear paths allow oversize output up  
to 24 x 64 in; standard roll feed supports printing  
up to 24 in x 50 ft and allows you to switch between  
loaded media options without intervention.  
1
fade-resistance. Graphic designers and professional  
photographers can rest assured that the images they  
create will maintain their impact.  
• Media that shows off your ideas. The HP Designjet  
130 Printer series can handle media weights up to  
80 lb (300 g/m2), as well as thick or rigid media up  
to 15 mil. Choose from a variety of media finishes,  
including gloss, satin and matte.  
• Rich color depth and minimal dot visibility. The  
six-color HP writing system delivers a wide range  
of colors, deeper blacks, continuous tones and  
superior gloss uniformity. A four picoliter ink drop  
size maintains fine detail reproductions, especially in  
dark areas, and smooth tonal transitions.  
Time to design  
• See reliable, consistent color from print to print.  
Print at speeds up to 4 minutes per page (mpp) for  
B-size and up to 12 mpp for an D-size color image  
in Normal mode, with fast color stability. Proofs and  
prints can be reviewed and approved in real time.  
Reliable color  
• See reliable, consistent color from print to print. The  
HP Designjet 130 Printer series features automatic  
closed-loop color calibration to provide consistent  
color, print to print and printer to printer.  
• More time creating. In-house printing for oversize  
output eliminates delays and shortens project  
timelines. Reliable, modular HP ink cartridges  
and printheads require minimal user intervention  
—further enhancing cost-effectiveness and efficiency.  
• Full color workflow support. Optimized Macintosh  
and Windows® drivers provide key features for  
creative professionals, including RGB ICC profiles  
and full Apple ColorSync support. Optional Adobe®  
PostScript® 3™ software RIP provides robust color  
management and proofing options for the CMYK  
workflow.  
1 Wilhelm Imaging Research, Inc. concluded that prints made with HP No. 85 ink  
cartridges and HP Premium Plus Photo papers may be displayed indoors under glass  
for 82 years before noticeable fading and staining occur.  
• Making professional color results simpler. HP’s  
free on-line knowledge center provides illustrated  
step-by-step instructions specific to your application,  
computer and workflow. And HP’s custom color  
profiling service provides high-quality ICC media  
profiles for professionals whose work demands  
superior color accuracy.  
 
As a creative professional, you need more than  
reliability, performance and value. Your world is  
all about color. That’s why HP has implemented  
technologies and solutions that deliver the color  
quality, consistency and control you need for a  
superior color experience.  
Color solutions for your workflow  
Color technology by HP  
RGB or CMYK. Printing or proofing. Pleasing color  
or accurate color. With the HP Designjet 130 printing  
system, you can choose the solution that best fits your  
needs, your workflow and your environment.  
Inks and media deliver fade resistance and stability  
New, dye-based inks, combined together with HP papers,  
produce images that stabilize in minutes vs. hours and last  
for years. HP inks, media and printers are designed together  
for results that do justice to your ideas.  
HP Designjet 130 drivers  
HP Designjet 130 Printer series  
(using HP Proofing Semi-gloss Paper)  
Optimized Mac and Windows drivers deliver  
outstanding color output for photographers or  
designers printing images in an RGB workflow.  
Support for RGB ICC profiles means you have the  
choice of managing color in the applications or via  
ICM profile or ColorSync tools.  
The drivers also allow you to balance color channels  
individually when you need one last tweak.  
EFI Designer Edition RIP for HP  
HP color layering technology  
The EFI Designer Edition RIP, tailored for HP printers  
offers a powerful, yet cost-effective digital proofing  
system that allows full control over digital proofing  
needs and saves hassle, time and money. Together, EFI  
and HP enable designers, photographers and other  
creative professional to easily generate proof quality  
prints with sharp detail, color accuracy and smooth  
tonal transitions.  
Like artists creating new colors by mixing the standard paints  
on their palettes, multi-layering technology  
uses the basic CMYKcm palette to achieve a much broader  
range of printable colors.  
By layering ultra small (4 pl) drops within a single dot, HP  
Designjet 130 printers produce smoother gradations between  
tones for virtually grain-free images.  
Third-party RIPs  
HP has worked with virtually all the leading RIP  
vendors in digital photography, large-format printing  
and pre-press proofing fields to ensure you can choose  
the solution that best matches your color workflow.  
Automatic color calibration  
The automatic closed-loop color (CLC) calibration process  
enables consistent and accurate color reproduction.  
The CLC process is based on measuring, via a color sensor,  
reflected energy from primary color tiles that are illuminated  
with a narrow-bond light source. The process works in much the  
same way as a classical densitometer. The printer generates a  
target, scans the pattern and adjusts based on the results.  
3
 
HP Designjet 130 Printer series  
Ordering information  
Technical specifications  
Product  
C7791C  
C7791H  
Accessories  
Q1246B  
C7797A  
Q1264A  
J7934G  
UC217E  
UC218E  
Q6643D  
Ink supplies  
C9420A  
C9421A  
C9422A  
C9423A  
C9424A  
C5019A  
C9425A  
C9426A  
C9427A  
C9428A  
C9429A  
C5016A  
Media  
HP Designjet 130 Printer  
Print speed  
HP Designjet 130r Printer  
Up to 4 min/page on B-size glossy media, up to 11.9 min/page on D-size glossy media  
Normal  
Best  
Up to 6 min/page on B-size glossy media, up to 17.5 min/page on D-size glossy media  
HP Designjet 100/500/800 24-in Stand & Bin  
HP Designjet Standard Roll Feed (included with 130r)  
HP Designjet 110/120/130 Spindle Accessory  
HP Jetdirect 620n Fast Ethernet Print Server  
ICC profile (creation of 1 profile)  
Printing  
Up to 2400 x 1200 dpi  
Print resolution  
Margins  
0.2 x 0.47 x 0.2 x 0.2 in  
HP Thermal Inkjet  
Technology  
HP Color Layering technology, PhotoREt IV  
Dye-based HP Vivera inks  
Technology resolution  
Ink types  
ICC profile (creation of 3 profiles)  
EFI Designer Edition 5.1 RIP for HP (XL) Intl  
Cyan, magenta, yellow, black, light cyan, light magenta  
4 pl  
Ink colors  
Ink drop  
HP 85 Cyan Printhead  
HP 85 Magenta Printhead  
HP 85 Yellow Printhead  
HP 85 Light Cyan Printhead  
HP 85 Light Magenta Printhead  
HP 84 Black Printhead  
HP 85 Cyan Ink Cartridge (28 ml)  
HP 85 Magenta Ink Cartridge (28 ml)  
HP 85 Yellow Ink Cartridge (69 ml)  
HP 85 Light Cyan Ink Cartridge (69 ml)  
HP 85 Light Magenta Ink Cartridge (69 ml)  
HP 84 Black Ink Cartridge (69 ml)  
6 (1 each cyan, magenta, yellow, black, light cyan, light magenta)  
0.002 in (0.04 mm)  
Print heads  
Minimum line width  
Media  
70-sheet input tray, front manual single-sheet feed, rear manual path for thick media, standard roll  
feed with auto cutter (130nr only)  
Handling  
Bond and coated paper (coated, heavyweight coated, plain), photo (gloss, high-gloss, semi-gloss,  
satin, matte), proofing (high-gloss contract, semi-gloss contract, matte)  
Tray 1: 17 to 40 lb (65 to 150 g/m2); manual single-sheet feed: 17 to 40 lb (65 to 150 g/m2);  
rear path: up to 80 lb (300 g/m2); roll feed: 17 to 40 lb (65 to 150 g/m2)  
Tray 1: 3 x 5.6 to 18 x 24 in; manual single-sheet feed: 4.3 x 8.1 to 24.6 x 64 in;  
rear path: 4.3 x 8.1 to 24.6 x 64 in; roll feed: up to 24 in  
Types  
Weight  
Size  
Q1961A  
Q1962A  
C6029C  
Q1412A  
C6019B  
Q1404A  
C1860A  
Q1396A  
Q5488A  
Q5486A  
Q5487A  
Q7920A  
Q5491A  
Q1426A  
Q1420A  
Q5492A  
Q1968A  
Q1967A  
HP Inkjet Coated Paper, C+, 100 sheets  
HP Inkjet Coated Paper, D+, 100 sheets  
Tray 1: up to 8 mil; envelopes: up to 15 mil; front path: up to 8 mil; rear path: up to 15 mil; roll  
feed: up to 8 mil  
Thickness  
HP Heavyweight Coated Paper 24 in x 100 ft  
HP Universal Heavyweight Coated Paper 24 in x 100 ft  
HP Coated Paper 24 in x 150 ft  
HP Universal Coated Paper 24 in x 150 ft  
HP Bright White Inkjet Paper 24 in x 150 ft  
HP Universal Bond Paper 24 in x 150 ft  
HP Premium Plus Gloss Photo Paper 24 in x 50 ft  
HP Premium Plus Gloss Photo Paper, B+, 25 sheets  
HP Premium Plus Gloss Photo Paper, C+, 20 sheets  
HP Premium Plus Satin Photo Paper 18 in x 50 ft  
HP Premium Plus Satin Photo Paper 4 in x 50 ft  
HP Universal High-gloss Photo Paper 24 in x 100 ft  
HP Universal Semi-gloss Photo Paper 24 in x 100 ft  
HP Matte Photo Paper, B+, 50 sheets  
A1, A1+, A2, A3, A4, B2, B3, B4, letter, legal, tabloid, C, D, D+, envelopes  
Standard sizes  
Connectivity  
USB 1.1 (USB 2.0 compliant), Centronics parallel IEEE-1284 (ECP compliant), 1 EIO slot.  
Compatible HP Jetdirect LAN cards  
Interfaces (standard)  
Interfaces (optional)  
Print languages  
PCL 3 GUI RGB 24-bit Contone; optional: Adobe PostScript 3 via software RIP  
PCL 3 GUI Windows driver, Microsoft Windows drivers (Vista®, XP, 2000) including support for  
AutoCAD 2000 and AutoCAD 13 - 14 drivers, USB and ECP drivers, Raster driver for Mac OS X  
v10.3, v10.4, v10.5  
Drivers (included)  
Dimensions (w x d x h)  
Printer  
130: 41.3 x 16.3 x 8.7 in (1050 x 415 x 220 mm), 130r: 41.3 x 21 x 8.7 in (1050 x 535 x 220 mm)  
130: 41.3 x 35.4 x 8.7 in (1050 x 900 x 220 mm), 130r: 41.3 x 40.1 x 8.7 in (1050 x 1020 x 220 mm)  
46.9 x 21.5 x 19.5 in (1192 x 545 x 493 mm)  
Maximum  
Shipping  
Weight  
HP Matte Proofing Paper 24 in x 100 ft  
HP Matte Proofing Paper, B+, 100 sheets  
Printer  
130: 48.5 lb (22 kg), 130r: 50.7 lb (23 kg)  
130: 74.6 lb (33.8 kg), 130r: 81.2 lb (36.8 kg)  
Shipping  
HP Care Pack Services  
What’s in the box  
HP Designjet 130  
Printer  
U3477E  
UC744E  
UC217E  
UC218E  
HP 3-Year Next Business Day Onsite Service  
HP Designjet 130 Printer, printheads (6), ink cartridges (6), input/output tray, input tray cover, HP media  
samples, documentation and drivers CD, quick reference guide, setup poster, USB cable, power cord  
HP Designjet 130 Printer, standard roll feed, printheads (6), ink cartridges (6), input/output tray,  
input tray cover, HP media samples, documentation and drivers CD, quick reference guide, setup  
poster, USB cable, power cord  
HP Installation Service with Network Setup  
HP Color Profiling Service - 1 Profile  
HP Color Profiling Service - 3 Profiles  
HP Designjet 130r  
Printer  
More HP media sizes and weights available at:  
Environmental ranges  
Operating temperature  
41 to 104° F (5 to 40° C)  
Recommended operating temperature  
Storage temperature  
Operating humidity  
Recommended humidity  
Storage humidity  
59 to 86° F (15 to 30° C)  
-4 to 131° F (-20 to 55° C)  
20 to 80% RH  
25 to 75% RH  
0 to 95% RH  
Acoustic  
Sound pressure, active  
Sound pressure, standby  
Sound power, active  
Sound power, standby  
50 dB(A)  
37 dB(A)  
6.2 B(A)  
5.4 B(A)  
Power consumption  
Maximum  
65 watts  
Standby  
17 watts  
Power requirements  
Input voltage 100 to 240 V ac (+/- 10%) auto ranging, 50/60 Hz (+/- 3Hz), 2 amp  
maximum  
© Copyright 2005, 2008 Hewlett-Packard Development Company, LP. The information contained herein is subject  
to change without notice. The only warranties for HP products and services are set forth in the express warranty  
statements accompanying such products and services. Nothing herein should be construed as constituting an  
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.  
Microsoft, Windows, Windows Vista and Windows XP are U.S. registered trademarks of Microsoft Corporation.  
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Adobe PostScript 3 is a trademark of Adobe  
Systems Incorporated. PANTONE is the property of Pantone, Inc.  
Certification  
Safety  
IIEC 950-compliant, EU LVD and EN60950 compliant, CSA certified for US and  
Canada, Mexico NOM-1-NYCE, Argentina IRAM, China CCC, Singapore PSB, Russia  
VNIIS, Poland ELTEST, Korea KTL  
Compliance for Class B products, Class A when connected to LANs, EU (EMC  
Directive), USA (FCC rules), Canada (DoC), Australia (ACA), New Zealand (MoC),  
China (CCC), Japan (VCCI), Class A for Korea (MIC), Taiwan (BSMI)  
Electromagnetic  
ENERGY STAR® qualified models see:  
Warranty  
One-year warranty  
For more information, visit our website at  
 
5982-5478ENUC, January 2009  

Graco Automobile Parts 205394 Series E User Manual
Graco Home Theater Server 243066 Series A User Manual
Grindmaster Refrigerator Model 3311 User Manual
Groupe SEB USA T FAL Iron FV5110 User Manual
Haier Air Conditioner AS072AZBDA User Manual
Harman Kardon Portable Multimedia Player AVR 245 User Manual
Hotpoint Oven HWD24X User Manual
HP Hewlett Packard Refrigerator PS 025 User Manual
Ice O Matic Ice Maker ICEU060 User Manual
iHome MP3 Docking Station iH17 User Manual