Grundig CRT Television MFS 55 4601 8 User Manual

COLOR  
TELEVISION  
XENTIA 55  
MFS 55-4601/8 TOP  
DEUTSCH  
ENGLISH  
ITALIANO  
PORTUGUÊS  
POLSKI  
ČESKY  
 
___________________________  
SET-UP AND SAFETY  
Please note the following information when setting up your television set.  
10  
cm  
10  
cm  
20  
cm  
This television set is designed to receive and display video and audio  
signals.  
Any other use is expressly prohibited.  
The ideal viewing distance is 5 times the screen diagonal.  
External light falling on the screen impairs picture quality.  
Ensure sufficient clearance between the TV and the wall cabinet.  
The television set is designed for use in dry rooms. If you do use it in the  
open, please ensure that it is protected from moisture, such as rain or  
splashing water. Do not expose the television set to any moisture.  
Do not place any vessels such as vases on the television, as they may  
spill liquid, thus presenting a safety risk.  
Place the television set on a solid, level surface. Do not place any  
objects such as newspapers on the television set or cloth or similar items  
beneath it.  
g
am Golf  
Do not place the television set close to heating units or in direct sunlight,  
as this will impair cooling.  
Heat build-up can be dangerous and shortens the operating life of the  
television set. For reasons of safety, have a specialist remove any dirt  
deposits in the set from time to time.  
Keep the television set away from magnetic fields (loudspeaker boxes,  
for example).  
VICE !  
! SER  
Do not open the television set under any circumstances. Warranty  
claims are excluded for damage resulting from improper handling.  
Ensure that the mains cable is not damaged.  
Thunderstorms are a danger to all electrical devices. Even if the tele-  
vision set is switched off, it can be damaged by a lightning strike to the  
mains or the antenna cable. Always disconnect the mains and antenna  
plugs during a storm.  
Clean the screen with a soft, damp cloth. Only use plain water.  
3
 
__________  
CONNECTION/PREPARATION  
Connecting the antenna and the mains cable  
TV  
R
AV  
AV  
2
1
2
1
1
2
Plug the antenna cable of the rooftop antenna into the »Ä« antenna  
socket on the television.  
Plug the mains cable into the wall socket.  
Inserting batteries in the remote control  
1
Open the battery compartment by removing the lid.  
2
Insert the batteries (Mignon type, for example UM-3 or  
AA, 2x1,5V).  
Observe the polarity (marked on the base of the battery  
compartment).  
3
Close the battery compartment.  
Note:  
If the television no longer reacts properly to remote  
control commands, the batteries may be flat. Be sure to  
remove used batteries.  
The manufacturer accepts no liability for damage re-  
sulting from used batteries.  
Environmental note  
Batteries, including those which contain no heavy metal,  
may not be disposed of with household waste. Please  
dispose of used batteries in an environmentally sound  
manner. Find out about the legal regulations which apply  
in your area.  
4
 
____________________________________________  
OVERVIEW  
The remote control  
Ǽ
Switches off the television set (stand-by).  
PIP  
E
-/--  
Key has no function.  
PIP  
Switches between picture formats.  
Switches between single and double-digit preset  
channels;  
switches to double character size in teletext mode.  
z
1...0  
Switches the television on from standby mode;  
selects channels directly.  
d
Sound on/off (mute).  
TXT  
AV  
POS  
d
SCAN  
PAP  
SIZE  
i
Opens and closes the info menu;  
closes all menus.  
VCR  
DVD  
Z
Zap function.  
SAT  
P+, P-  
Switches the television on from standby;  
selects stations step by step;  
moves the cursor in the menus up and down.  
Tele Pilot 160 C  
Ǹ Ƿ  
Adjusts the volume;  
moves the cursor left/right.  
OK  
Calls up the preset channels;  
activates various functions.  
TXT  
AV  
Switches between teletext and TV modes.  
Selects the AV channels and the most recently viewed  
television channel.  
SCAN  
PAP  
Reveal answer in teletext mode.  
Page stop in teletext mode.  
SIZE  
POS  
Selects the sub-pages in teletext mode.  
Updates a page in teletext mode.  
5
 
____________________________________________  
OVERVIEW  
z
Selects various picture settings;  
scrolls back a page in teletext mode.  
Ȅ
Calls up the TV Guide (information about the current  
and next broadcast) and time.  
PIP  
Moves to the next page in teletext mode.  
Ƿ
Selects the desired chapter in teletext mode.  
F
Selects various audio settings;  
selects the desired topic in teletext mode  
z
VCR, SAT Switches to operating a GRUNDIG video  
DVD  
recorder, a GRUNDIG satellite receiver or  
a GRUNDIG DVD player.  
TXT  
AV  
POS  
d
Keep the relevant buttons (»VCR«, »SAT«, »DVD«)  
pressed down. Then press the button you require.  
SCAN  
PAP  
SIZE  
Note:  
VCR  
DVD  
SAT  
The functions available to you depend on the model of  
the device you are using.  
Just try it out.  
Tele Pilot 160 C  
The front of the television set  
Ȃ
Switches the television into and out of  
standby mode  
+ PR -  
Channel selection  
Switches the television on from stand-  
by  
+ VOL -  
R AUDIO L  
VIDEO  
Adjusts the volume  
PR  
Audio signal input for camcorder  
Video signal input for camcorder  
VO  
L
S-VHS  
Video signal input for S-video  
camcorders  
R
AUDIO  
VIDEO  
L
y
Headphone jack (3.5 mm ø jack  
plug)  
S-VHS  
6
 
______________________________________________  
SETTINGS  
Setting television channels automatically  
The television set is equipped with an automatic channel search  
system.  
You start the search and can then sort the television channels into  
your order of preference.  
100 preset positions are provided, to which you can assign televisi-  
on channels from the antenna or from the cable connection.  
You can also delete television channels from the channel list which  
were found more than once or which have poor reception.  
1
Switch on the television with »  
press »P+« on the remote control.  
– The »Language« menu appears when the television is first  
switched on.  
Ȃ« on the television set, then  
Language  
English  
Deutsch  
Francais  
Italiano  
Español  
Portuguesa  
Eλληvικα  
Türkçe  
Svenska  
Dansk  
Norsk  
Suomi  
Slovensko  
Polski  
Magyar  
Pycckꢄꢄ  
¹1ꢈꢈꢈ  
Romaneste  
Hirvatski  
âe‰tina  
Slovenãina  
Gjuha Shqipe  
ꢀꢁꢂꢃapckꢄ  
Makeꢅꢆhckꢅꢄ  
Srpski  
Hint:  
If the »Language« menu does not appear on the screen,  
then set it in accordance with the chapter on resetting all tele-  
vision channels on page 24.  
Dutch  
Select  
OK  
İ
2
Select language with »P+«, »P-«, » « or » « and press  
»OK« to confirm.  
– The »Country Selection« menu appears.  
Ǹ
Ƿ
Country Selection  
Belgium  
Czech Rep.  
Danmark  
Deutschland  
Eλλaδa  
Hungary  
Ireland  
Italia  
Netherlands Sverige  
Norge  
Portugal  
Schweiz  
Suomi  
3
4
Select the country using »P+«, »P-«, » « or » «.  
Ǹ
Ƿ
Press »OK« to start the automatic search.  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
Türkiye  
U.K.  
...........  
España  
France  
Österreich  
Polska  
– After performing the search, the menu »Provider Selection« is  
displayed, (only if a provider was found). Kabel 1 in Ger-  
many, for example.) Press »P+« or »P-« to select the TV  
Guide provider and confirm by pressing »OK«.  
Start Autoprogramming  
OK  
İ
i
Exit  
Changing stored channels  
You can delete channels that have been stored more than once  
during the automatic search. You can also store channels in a diffe-  
rent preset position, change or enter the name of a channel as well  
as skip channels.  
Selecting the station list  
MAIN MENU  
1
Press »i« to open the »MAIN MENU«.  
Sound  
Picture  
2
Select »Preset List« with »P+« or »P-« and confirm with »OK«  
– The »Preset List« menu appears.  
Preset List  
Channel settings  
Settings  
Note:  
Further operation is explained in the following sections.  
Select  
OK  
İ
i
Exit  
7
 
______________________________________________  
SETTINGS  
Deleting channels  
1
In the »Preset List« menu, select the station to be deleted by  
Preset List  
0
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
pressing »P+«, »P-«, » « or » «.  
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
Ǹ
Ƿ
Ƿ
2
Press » « (yellow) to delete the channel.  
13  
9 KABEL1 14  
Note:  
To delete other stations, repeat steps 1 and 2.  
Skip  
Move  
Delete  
Select  
OK  
İ
Sorting television channels  
i
Exit  
Name  
1
In the »Preset List« menu, select the channel to be moved with  
»P+«, »P-«, » « or » «.  
Ǹ
Ƿ
Preset List  
0
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
2
3
Highlight the channel with »  
Ȅ« (green).  
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
Select a new channel position by pressing »P+«, »P-«, » « or  
Ǹ
13  
9 KABEL1 14  
»
« and then press »Ȅ« to confirm.  
Ƿ
– All of the channels that follow move up one position.  
Skip  
Move  
Delete  
Name  
Select  
OK  
İ
Note:  
i
Exit  
To sort the other television channels repeat steps 1 to 3.  
Entering the channel names  
(maximum of 5 characters)  
1
In the »Preset List« menu, select the desired channel with »P+«,  
»P-«, » « or » «.  
Preset List  
0
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
Ǹ
Ƿ
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
F
2
3
Highlight the channel with » « (blue).  
13  
9 KABEL1 14  
Select letters or numbers with »P+« or »P-«, move to the next  
position with » « or » « and repeat.  
Ǹ
Ƿ
Skip  
Move  
Delete  
Select  
OK  
İ
F
4
Store the channel name with » « (blue).  
i
Exit  
Name  
Note:  
To enter additional channel names, repeat steps 1 to 4.  
Skipping television channels  
You can mark television channels which should be skipped during  
selection with »P+« or »P-«. A selection with the number keys is  
also possible.  
1
In the »Preset List« menu, select the desired channel with »P+«,  
»P-«, » « or » «.  
Preset List  
0
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
Ǹ
Ƿ
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
z
2
Highlight the channel with »  
« (red).  
13  
– The television channel is now displayed against a red back-  
9 KABEL1 14  
ground.  
Skip  
Move  
Delete  
Name  
You can deselect the selected channel by pressing the red  
button again.  
Select  
OK  
İ
i
Exit  
Concluding the settings  
Press »i« to finish the settings.  
1
8
 
______________________________________________  
SETTINGS  
Picture settings  
1
2
3
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Color temperature Normal  
DNR  
Store  
Select »Picture« with »P+« or »P-« and confirm with »OK«.  
– The »Picture« menu appears.  
Off  
Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or  
»Color temperatur« with »P+« or »P-« and adjust them with  
OK  
İ
»
« or » «.  
Ǹ
Ƿ
Back  
i
Exit  
Note:  
The »DNR« function improves the picture if the antenna signal  
is poor.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Color temperature Normal  
4
5
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
DNR  
Store  
Off  
– The »Stored« message appears.  
Note:  
OK  
İ
The settings are saved as the »User« picture default setting.  
Back  
i
Exit  
Press »i« to finish the settings.  
9
 
______________________________________________  
SETTINGS  
Audio settings  
1
Press »i« to open the »MENU«.  
– The »MENU« appears.  
Sound  
Volume  
Balance  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
Stereo  
Normal  
Off  
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.  
– The »Sound« menu appears.  
Note:  
Further operation is explained in the following sections.  
OK  
İ
Back  
i
Exit  
Volume  
Sound  
The standard volume is set here. This is the volume of the device  
after switching on.  
Volume  
Balance  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
Stereo  
Normal  
Off  
1
Select »Volume« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
2
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
OK  
İ
Back  
i
Exit  
Balance  
Sound  
Volume  
Balance  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
1
Select »Balance« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Stereo  
Normal  
Off  
Ǹ
Ƿ
2
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
OK  
İ
Back  
i
Exit  
Stereo / two channel, mono  
If the device receives two channel programmes, e.g. a film with the  
original sound on sound channel B (display: »Dual II «) and the  
dubbed version on sound channel A (display: »Dual I«), you can  
select the sound channel you desire.  
If the device receives stereo or Nicam programmes, it switches  
automatically to stereo sound (display: »Stereo«).  
You can switch the sound to »Mono« if the stereo reception  
quality is poor.  
Sound  
Volume  
Balance  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
Stereo  
Normal  
Off  
1
Select »Sound Type« with »P+« or »P-« and adjust the setting  
with » « or » «.  
Ǹ
Ƿ
OK  
İ
2
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
Back  
i
Exit  
10  
 
______________________________________________  
SETTINGS  
Stereo width  
Sound  
Widens the audio output for stereo programmes and improves the  
sound with mono reception.  
Volume  
Balance  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
Stereo  
Normal  
Off  
1
2
3
Select »Sound Mode« with »P+« or »P-«.  
Press » « or » « to select the setting.  
Ǹ
Ƿ
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
OK  
İ
Back  
i
Exit  
Automatic volume  
Sound  
The television channels broadcast at different volumes. The automa-  
tic volume limiting (AVL) function means the volume is kept the same  
when you switch between channels.  
Volume  
Balance  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
Stereo  
Normal  
Off  
1
Select »AVL« with »P+« or »P-« and then select »On« with  
« or » «.  
»
Ǹ
Ƿ
OK  
İ
2
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
Back  
i
Exit  
Equalizer  
The equalizer offers you four preset sound settings (Music, Sports,  
Cinema and Speech) and one which you can create yourself (User).  
Sound  
Volume  
Balance  
1
2
Select »Equalizer« by pressing »P+« or »P-« and press »OK«  
to confirm.  
– The »Equalizer« menu appears.  
Sound Type  
Sound Mode  
AVL  
Equalizer  
Store  
Stereo  
Normal  
Off  
Select the »User« audio setting using »P+« or »P-« and press  
»OK« to confirm.  
– The »0.1 kHz« frequency band is activated.  
Select  
OK  
İ
Back  
i
Exit  
3
4
Set the value using »P+« or »P-« and select the next frequency  
Equalizer  
Music  
Sports  
Cinema  
Speech  
User  
band by pressing » « or » «.  
Ǹ
Ƿ
Press »OK« to save the setting.  
0.1 0.5 1.5  
5
10  
Concluding the settings  
Press »i« to finish the settings.  
1
OK  
İ
Back  
i
Exit  
11  
 
___________________  
TELEVISION OPERATION  
Basic functions  
Switching on and off  
1
Switch on the television by pressing the »  
vision set.  
Ȃ« button on the tele-  
– The device switches to standby mode.  
PIP  
Switch the television on with »1…0« or »P+« or »P-«.  
2
Press the »Ǽ« button to switch the television to standby mode.  
Press »1…0« or »P+« or »P-« to switch on the device from  
standby mode.  
– After switching on, the station preset of the TV Guide provider  
is automatically selected. After a short time, the information  
about the current and upcoming broadcast is displayed.  
z
3
Completely switch the television off by pressing »  
television set.  
– This saves electricity.  
Ȃ« on the  
TXT  
AV  
POS  
d
SCAN  
PAP  
SIZE  
Selecting channels  
1
Use »1…0« to select channels directly.  
Preselect two digit channel positions with »–/«.  
VCR  
DVD  
SAT  
2
Press »P+« or »P-« to move up and down channels.  
Selecting AV channel positions  
Tele Pilot 160 C  
1
Use »AV« to select AV channels directly.  
Adjusting the volume  
1
Adjust the volume with » « or » «.  
Ǹ
Ƿ
Muting  
1
Use » « to switch the sound off (mute) and to switch it on  
again.  
p
Call up TV Guide and time.  
After switching the station presets, information about the current  
broadcast is displayed (TV Guide).  
1
Call up information about the current and next broadcast by  
pressing » «.  
- The information and the time are briefly displayed.  
Ȅ
Note:  
If the message »No info« is displayed, switch to the channel  
preset of the TV Guide provider by pressing »1…0« or »P+«  
or »P-«. After a few minutes the new data will have been loa-  
ded.  
Displaying information  
1
Press »POS« to display the information.  
– The display disappears automatically after a short while.  
12  
 
___________________  
TELEVISION OPERATION  
Picture settings  
1
Select the desired picture setting from »User«, »Natural«,  
z
»Rich« or »Soft« with »  
«.  
You can alter the »User« picture setting, see the ”Picture  
settings” chapter on page 9.  
Audio settings  
F
1
Press » « to select the audio setting »User«, »Music«,  
»Sports«, »Cinema« or »Speech«.  
You can alter the »User« audio setting – see the “equalizer”  
chapter on page 11.  
Zap function  
This function allows you to save the television channel which you  
are currently watching and switch to other channels (zapping).  
1
Select the channel you want to save in the zap memory with  
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by  
pressing »Z«.  
>
– The display »z – P1 BBC1« appears in the screen.  
2
3
Change channels with »1…0« or »P+« »P-«.  
You can now use »Z« to switch between the saved channel (in  
the example, BBC1) and the channel you were watching before.  
4
Press »i« to quit the zap function.  
– The display disappears.  
Changing the picture format  
The television automatically switches to the 16:9 format, if this  
format is recognised by the Euro-AV socket.  
1
Select the picture format with »  
format, for example »16:9«, appears on the screen.  
You can choose between the following picture formats:  
«. The selected picture  
E
»Auto« format  
The picture format is automatically switched to »16:9« with 16:9  
channels.  
For programmes in 4:3 format, the picture automatically fills the  
screen.  
»4:3« format  
For 4:3 programmes, select picture format »4:3«.  
»16:9« format  
For 16:9 programmes, select picture format »16:9«.  
13  
 
_______________________________  
TELETEXT MODE  
TOP text or FLOF text mode  
1
Press »TXT« to switch to teletext mode.  
2
You can directly select teletext pages with »1...0«.  
Return to the overview page 100 with »i«.  
PIP  
Note:  
At the bottom of the screen, you will see an information line  
consisting of a red, green and, depending on the station,  
yellow and blue text field. Your remote control has buttons with  
the corresponding colours.  
z
z
3
4
5
6
7
Press »  
« (red) to scroll back a page.  
Press »  
Ȅ
« (green) to scroll to the next page.  
TXT  
AV  
POS  
d
Ƿ
Press » « (yellow) to select chapters.  
SCAN  
PAP  
SIZE  
F
Press » « (blue) to select topics.  
Press »TXT« to switch off teletext mode.  
VCR  
DVD  
SAT  
Normal text mode  
1
Press »TXT« to switch to teletext mode.  
Tele Pilot 160 C  
2
You can directly select teletext pages with »1...0«.  
Return to the overview page 100 with »i«.  
3
4
5
Press »P-« to scroll back a page.  
Press »P+« to scroll to the next page.  
Press »TXT« to switch off teletext mode.  
Additional functions  
Waiting  
While a page is being searched for, you can switch to the television  
channel.  
1
Enter the number of the teletext page with »1…0« and then  
press »POS«.  
– As soon as the page is found, the teletext page number  
appears in the top left hand corner of the screen.  
2
Switch to the teletext page by pressing »POS«.  
14  
 
_______________________________  
TELETEXT MODE  
Increasing character size  
If you have difficulty reading the text on the screen, you can double  
the character size.  
1
To enlarge the character size of a teletext page, press »–/«  
repeatedly.  
PIP  
Page stop  
A multiple page may contain several sub-pages, which are automa-  
tically scrolled by the transmitting station.  
z
1
2
Stop the sub-pages with »PAP«.  
Press »PAP« to quit the function.  
TXT  
AV  
POS  
d
Calling up a sub-page directly  
SCAN  
PAP  
SIZE  
If the selected teletext page contains additional pages, the number  
of the current sub-page as well as the total number of pages is  
displayed.  
VCR  
DVD  
SAT  
1
2
Call up the sub-pages with »SIZE«.  
Enter the four-digit number for the sub-page with »1…0«.  
– The selected sub-page is displayed after a short delay.  
Tele Pilot 160 C  
Reveal answer  
Certain teletext pages contain ”hidden answers” or information  
which can be called up.  
1
2
Display information with »SCAN«.  
Conceal information with »SCAN«.  
15  
 
______________  
CONVENIENCE FUNCTIONS  
Convenience functions with the »Settings« menu  
1
Press »i« to open the »MAIN MENU«.  
2
Select »Settings« with »P+« or »P-« and confirm with »OK«.  
Note:  
Further operation is explained in the following sections.  
Changing the menu language  
1
Select »Language« with »P+« or »P-« and confirm with  
Settings  
»OK«.  
Language  
Timer  
– The »Language« menu appears.  
TV Guide  
2
3
Select the language with »P+«, »P-« and press »OK« to con-  
firm.  
Select  
OK  
İ
Back  
i
Exit  
Press »i« to finish the setting.  
Entering the switch-on and alarm times  
You can select various timer functions in the »Timer« menu.  
»Clock« shows the current time.  
»On time«, after this time has elapsed, the television  
switches on from standby mode. In »Program« you can enter the TV  
station with which the television switches on.  
Settings  
»Off time«, after this time has elapsed, the television  
switches to standby mode.  
Language  
Timer  
TV Guide  
»Alarm time«, after this time has elapsed, the television switches on  
from standby mode. An alarm tone also sounds.  
Select  
OK  
İ
Back  
1
2
Select »Timer« with »P+« or »P-« and press »OK« to confirm.  
i
Exit  
Select »Clock«, »On Time«, »Off Time«, »Alarm Time« or »Pro-  
gram« by pressing »P+« or »P-«.  
Timer  
Clock  
08:24  
On Time  
Off Time  
Alarm Time  
Program  
––:––  
––:––  
––:––  
P1 ARD  
3
4
Enter the switch-on time, switch-off time or alarm time and  
TV station with »1…0«.  
Press »i« to finish the setting.  
Note:  
You can switch off the alarm tone by pressing »i«.  
0-9  
OK  
İ
Back  
i
Exit  
16  
 
______________  
CONVENIENCE FUNCTIONS  
Parental lock  
You can block any station. The screen goes black.  
1
Press »i« to open the »MAIN MENU«.  
Channel Settings  
System  
Channel  
Search  
Fine Tune  
Prog No  
Child Lock  
Store  
– The »MAIN MENU« appears.  
BG  
C 06  
< >  
0
P1  
Off  
2
3
4
Select »Channel Setting« by pressing »P+« or »P-«.  
Select »Child Lock« with »P+« or »P-«.  
Autoprogram  
Press » « or » « to activate or deactivate the parental lock  
Ǹ
Ƿ
(On) or (Off).  
Press »i« to finish the setting.  
OK  
İ
Back  
5
i
Exit  
TV Guide  
TV Guide provides you with information about the current and the  
next broadcast.  
Who offers TV Guide?  
Certain stations – Kabel 1, for example – offer this service for  
almost all TV programs.  
How TV Guide works  
The station information is »loaded« once you have selected the pre-  
set for the programme provider.  
Transferring all information to the television is somewhat time-con-  
suming, but you can call up the most current information in just a  
few minutes.  
Notes:  
Operation with a satellite receiver is not possible with TV Guide.  
If you change the station position during the time the device uses for  
data transfer, it is possible that not all information will be loaded.  
TV Guide settings  
1
2
3
Call up the »MAIN MENU« by pressing »i«.  
Settings  
Language  
Timer  
Select the line »Settings« and confirm by pressing »OK«.  
TV Guide  
Select the line »TV Guide« by pressing »P+« or »P-« and con-  
firm by pressing »OK«.  
Select  
OK  
İ
Back  
Note:  
i
Exit  
Additional operations are explained in the following sections.  
17  
 
______________  
CONVENIENCE FUNCTIONS  
Changing stations  
Check to see which television programme (provider) offers service  
for TV Guide.  
TV Guide  
Date  
Provider  
Station Match  
Display Info  
10.12.2004  
P13 Kabel  
ARD  
1
2
Select »Provider« by pressing »P+« or »P-«.  
On  
Select the television station (provider) by pressing » « or »  
and confirm by pressing »OK«.  
«
Ǹ
Ƿ
OK  
İ
Back  
i
Exit  
3
Exit settings by pressing »i«.  
Switching the station, name display on/off  
If you switch off the station name display, this information is not  
shown when switching the programme presets.  
TV Guide  
Date  
Provider  
Station Match  
Display Info  
1
2
3
Select the line »Display Info« by pressing »P+« or »P-« and  
confirm by pressing »OK«.  
10.12.2004  
P13 Kabel  
ARD  
On  
Activate (On) or deactivate (Off) the function by pressing »  
«
Ǹ
or » «.  
Ƿ
OK  
İ
Exit the setting by pressing »i«.  
Back  
i
Exit  
Assigning television stations (station matching)  
You will need to use the station matching function if stations are not  
recognised by TV Guide.  
In the »Station Match« line these are designated as »None«.  
1
Select the program that you would like to assign by pressing  
»P+« or »P-«.  
Settings  
Language  
Timer  
2
3
4
Call up the »MAIN MENU« by pressing »i«.  
TV Guide  
Select the line »Settings« and confirm by pressing »OK«.  
Select  
OK  
İ
Back  
Select the line »TV Guide« by pressing »P+« or »P-« and con-  
firm by pressing »OK«.  
i
Exit  
TV Guide  
Date  
Provider  
Station Match  
Display Info  
5
6
Select the line »Station Match« by pressing »P+« or »P-«.  
10.12.2004  
P13 Kabel  
ARD  
Select the station ID for the selected television station by  
pressing» « or » « .  
On  
Ǹ
Ƿ
- If the station ID is not available at the selection, the station is  
not supported by the provider.  
OK  
İ
Back  
i
Exit  
7
Exit the setting by pressing »i«.  
18  
 
_______________  
USING EXTERNAL DEVICES  
Decoder or satellite receiver  
In order for the television to receive encoded programs from a  
privately operated station, a decoder is needed.  
Connecting a decoder or satellite receiver  
Decoder  
AV  
AV  
2
1
PAY-TV  
1
Connect the »AV1« socket on the television set and the appropriate  
socket on the decoder using a EURO-AV cable.  
Notes:  
A satellite receiver can also be connected to this socket.  
If you want to use both a satellite receiver and a decoder, the  
decoder must be connected to the satellite receiver.  
Using a decoder  
1
Switch on the television and the decoder.  
2
Select the »AV1« preset channel by pressing »AV« repeatedly  
until »AV1« appears on the screen.  
Headphones  
Connecting headphones  
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-  
phone socket on the television.  
R
AUDIO  
L
EO  
ID  
V
S
S-VH  
Adjusting the headphone volume  
1
Press » « to mute the television sound.  
p
2
Press » « or » « to adjust the headphone volume.  
Ǹ
Ƿ
19  
 
_______________  
USING EXTERNAL DEVICES  
Video recorder, DVD player or SET-TOP box  
Connecting the video recorder, DVD player or  
SET-TOP box  
AV  
2
AUDIO OUT  
DIGITAL AUDIO OUT  
VIDEO OUT  
L
EURO  
AV  
TV  
10-240  
50/60Hz 20  
V
W
~
S
VIDEO OUT  
1
Connect the »AV1« or »AV2« television sockets and the corre-  
sponding sockets of the video recorder, DVD player or the SET-  
TOP box with a Euro-AV (Scart) cable.  
Using a video recorder, DVD player or SET-TOP box  
1
Switch on the video recorder, DVD player or SET-TOP box and  
select the function you wish to use.  
2
Select the »AV1« or »AV2« channel positions with »AV«.  
You can hear and see the video and audio information from  
the video recorder or the SET-TOP box on the television set.  
Connecting the SVHS video recorder  
If you own a SVHS video recorder, you can connect it using a  
Euro-AV cable to the »AV2« socket.  
Using a SVHS video recorder  
1
Switch on the video recorder and select the function you wish  
to use.  
2
Select the »AV2S« preset channel with »AV«.  
You will see the picture and hear the sound of the video  
recorder on the television.  
20  
 
_______________  
USING EXTERNAL DEVICES  
Camcorder  
1
Connect the yellow socket (VIDEO – picture signal) on the tele-  
vision and the corresponding socket on the camcorder (VHS,  
Video 8) with a cinch cable;  
PR  
VO  
L
or  
R
DIO  
EO  
U
A
connect the S-VHS socket (S-VIDEO – picture signal) on the  
television and the corresponding socket on the camcorder (S-  
VHS, Hi 8) with a cinch cable.  
L
VID  
S-VHS  
2
Connect the white and red sockets (L AUDIO R – sound signal)  
on the television and the corresponding sockets of the camcor-  
der with a cinch cable.  
Note:  
If a mono camera is connected, connect the white socket (L)  
of the television and the corresponding socket of the camera. Sel-  
ect »Mono« in the »Sound« menu during mono operation.  
Operating with a camcorder  
1
Switch on the camcorder, insert a cassette and start playback.  
2
Select the preset channel »AV3« (for VHS, Video 8) or »AV3-S«  
(for S-VHS, Hi 8), by pressing »AV« repeatedly until »AV3« or  
»AV3-S« appears in the screen.  
You will see the picture and hear the sound of the camcorder  
on the television.  
21  
 
______________________________  
SPECIAL SETTINGS  
Setting television channels  
This setting is only necessary if a new channel comes on air and you  
do not want to change the order of your channels. The television  
channel can be set directly or using the search.  
MAIN MENU  
Setting channels using the search  
Sound  
1
Press »i« to open the »MAIN MENU«.  
Picture  
– The »MAIN MENU« appears.  
Preset List  
Channel Settings  
Settings  
2
Select »Channel Settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel Settings« menu appears.  
Select  
OK  
İ
i
Exit  
3
4
Select »Prog No« with »P+« or »P-« and set the preset channel  
with » « or » «.  
Ǹ
Ƿ
Channel Settings  
Select »Search« with »P+« or »P-« and start the search with  
« or » «.  
System  
Channel  
Search  
BG  
C 06  
< >  
0
P1  
Off  
»
Ǹ
Ƿ
– If a strong station signal is received, the search is interrupted  
and the picture appears. Repeat the search until the channel  
you want appears on the screen.  
Fine Tune  
Prog No  
Child Lock  
Store  
Autoprogram  
Note:  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
OK  
İ
Back  
i
Exit  
Ǹ
Ƿ
5
6
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Channel Settings  
System  
Channel  
Search  
Fine Tune  
Prog No  
Child Lock  
Store  
BG  
C 06  
< >  
0
P1  
Off  
Note:  
To set other television stations, repeat steps 3 to 5.  
Press »i« to finish the setting.  
Autoprogram  
Store  
OK  
İ
Back  
i
Exit  
22  
 
______________________________  
SPECIAL SETTINGS  
Fine tuning television channels  
The television automatically tunes itself to the best possible recepti-  
on. You may need to carry out manual fine tuning in areas where  
there is poor reception.  
1
Press »i« to open the »MAIN MENU«.  
Channel Settings  
System  
Channel  
Search  
Fine Tune  
Prog No  
Child Lock  
Store  
– The »MAIN MENU« appears.  
BG  
C 06  
< >  
0
P1  
Off  
2
Select »Channel Settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel Settings« menu appears.  
Autoprogram  
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »  
«
Ǹ
or » «.  
Ƿ
OK  
İ
Back  
i
Exit  
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Press »i« to finish the setting.  
Setting the television channels by entering the  
channel numbers  
MAIN MENU  
Sound  
Picture  
1
Press »i« to open the »MAIN MENU«.  
Preset List  
Channel Settings  
Settings  
– The »MAIN MENU« appears.  
2
Select »Channel Settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel Settings« menu appears.  
Select  
OK  
İ
i
Exit  
3
Select »Prog No« with »P+« or »P-« and set the  
channel with » « or » «.  
Ǹ
Ƿ
Channel Settings  
4
5
Select »Channel« with »P+« or »P-« and confirm with »OK«.  
System  
Channel  
Search  
Fine Tune  
Prog No  
Child Lock  
Store  
BG  
C 06  
< >  
0
P1  
Off  
Press »OK« to choose between »S« (special channel) and »C«  
(channel).  
6
Press » « or » « to switch up and down channels or use  
»1…0« to enter the channel number directly.  
Ǹ
Ƿ
Autoprogram  
0-9  
C/S  
Note:  
OK  
İ
Back  
i
Exit  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Ǹ
Ƿ
Channel Settings  
System  
Channel  
Search  
Fine Tune  
Prog No  
Child Lock  
Store  
BG  
C 06  
< >  
0
P1  
Off  
7
8
Select »Store« with »P+« or »P-« and confirm with »OK«.  
Note:  
To set other television stations, repeat steps 3 to 7.  
Autoprogram  
Press »i« to finish the setting.  
Store  
OK  
İ
Back  
i
Exit  
23  
 
______________________________  
SPECIAL SETTINGS  
Re-tuning all television channels  
You can re-tune all the television stations, for example if you move  
to another town.  
1
Press »i« to open the »MAIN MENU«.  
Channel Settings  
System  
Channel  
Search  
Fine Tune  
Prog No  
Child Lock  
Store  
– The »MAIN MENU« appears.  
BG  
C 06  
< >  
0
P1  
Off  
2
Select »Channel Settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel Settings« menu appears.  
Autoprogram  
3
4
Select »Prog No« with »P+« or »P-« and using » « or »  
«
Ǹ
Ƿ
0-9 -/--  
enter the channel numbers from the point they should be saved.  
OK  
İ
Back  
i
Exit  
Select »Autoprogram« with »P+« or »P-« and confirm with  
»OK«.  
– The »Country Selection« menu appears.  
Country Selection  
Belgium  
Czech Rep.  
Danmark  
Deutschland  
Eλλaδa  
Hungary  
Ireland  
Italia  
Netherlands Sverige  
Norge  
Portugal  
Schweiz  
Suomi  
5
Select the country using »P+«, »P-«, » « or » « and confirm  
Ǹ
Ƿ
with »OK«.  
Türkiye  
U.K.  
...........  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
España  
France  
Österreich  
Polska  
Note:  
Start Autoprogramming  
OK  
İ
You can interrupt the search by pressing »i«.  
Back  
i
Exit  
24  
 
_____________________________________  
INFORMATION  
Technical data  
Mains voltage:  
230 V, 50/60 Hz  
Power consumption: In standby mode 2 W  
Switched on 51 W  
Sound output:  
2x14 Watts music  
Reception ranges:  
C01 ... C99, special channels S01 ... S41,  
frequency band 1 ... 4  
Channel positions: 100 und 4 AV  
Service information for dealers:  
The product complies with the following EU directives:  
73/23/EEC directive for electrical equipment to be used within  
defined voltage ranges. 89/336/EEC directive on electromagnetic  
compatibility.  
The television set complies with the following standards: EN 60065,  
EN 55013, EN 55020  
Environmental note  
This product has been made from high-quality parts and materials  
which can be re-used and recycled.  
Therefore, do not throw the product away with normal household  
waste at the end of its life. Take it to a collection point for recycling  
electrical and electronic devices. This is indicated by this symbol on  
the product, in the operating manual and on the packaging.  
Please find out about collection points operated by your local autho-  
rity.  
Help protect the environment by recycling used products.  
25  
 
_____________________________________  
INFORMATION  
Troubleshooting  
If the remedies given below do not work, please consult an authori-  
sed GRUNDIG dealer. Please bear in mind that malfunctions can  
also be caused by external devices such as video recorders or satel-  
lite receivers.  
Fault  
Possible cause  
Remedy  
Screen lit (snow), but no  
station  
Antenna cable  
Is the antenna cable  
connected?  
No television station pro-  
grammed  
Start the station search  
Poor picture contrast  
Picture settings incorrectly Adjust the brightness,  
set  
contrast or colour setting  
Test with another channel  
Problem at station  
Interference to picture  
and/or sound  
Interference from other  
devices  
Change the position of the  
device  
Ghosts, reflection  
Channel setting  
Automatic or manual chan-  
nel setting/fine tuning  
Antenna  
Have antenna cable or  
system checked  
No colour  
Colour intensity at minimum Turn up the colour  
TV standard setting (if Select the correct colour  
setting option is available) standard  
Problem at station  
Test with another channel  
Inappropriate colour,  
colour spots  
Strong magnetic field due, Move the loudspeakers  
for example, to loudspea- away from the television.  
kers  
If colour spots remain,  
switch off the television set  
at the mains and switch on  
again after 10 minutes  
Volume set to minimum  
Turn up or switch on the  
volume  
Picture but no sound  
Problem at station  
Test with another channel  
Test another channel for  
Television station (has no  
teletext) or antenna system fine tuning and ghosts  
Teletext missing or faulty  
Station signal too weak  
No optical connection  
Check the antenna system  
Point the remote control at  
the television set  
Remote control does not  
work  
Remote control batteries  
Check the batteries, change  
if necessary  
Operating condition unde- Switch off the television  
fined  
with the main power button  
for approximately  
2 minutes  
Parental lock has been  
activated  
Switch off the parental lock  
The picture is unrecognisa-  
ble after switching on the  
television  
26  
 
_____________________________________  
INFORMATION  
Additional Information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
27  
 
Grundig Multimedia B.V. • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam •  
 

Grizzly Lathe G8691 User Manual
Hamilton Beach Mixer 64650 User Manual
Harbor Freight Tools Saw 45885 User Manual
Harbor Freight Tools Saw 92386 User Manual
Harman Stove Company Electric Heater The Harman Accentra Pellet Insert User Manual
Heat Controller Air Conditioner 10 User Manual
HP Hewlett Packard Computer Drive DL785 User Manual
Hubbell Switch LXi 1900 User Manual
Hyundai Flat Panel Television Q320 User Manual
Image Treadmill IMTL305100 User Manual