MODEL H6241
TRAILER DOLLY
INSTRUCTION SHEET
To reduce the risk of property damage,
serious personal injury, or death when
using this trailer dolly, take the following
precautions:
•
Refer to your trailer owner's manual to
verify the Trailer Net Weight does not
exceed the maximum trailer dolly load
rating of 600 lbs.
•
Never attempt to tow or park a trailer
with this dolly on any kind of hill, ramp,
or incline.
•
Only use this trailer dolly on a hard
level surface capable of sustaining the
combined load.
Only use this trailer dolly to move an
empty trailer.
Always block trailer wheels and dolly
wheels when not in use or in motion.
Do not modify this trailer dolly.
Never allow children to play with or
near the trailer dolly while in use or in
storage.
Specifications
•
•
•
•
•
Maximum Load: 600 lbs.
Ball Hitch Diameter: 13⁄4".
Wheel Diameter: 10".
Handle Length: 48".
•
•
Unit Weight: 31lbs.
•
•
Operation
1. Read all required safety precautions listed.
•
•
Never work under a trailer that is
supported by a trailer dolly.
2. On a level surface, correctly shut down and
park the towing vehicle. Then block the trailer
wheels.
Periodically inspect the ball hitch,
fasteners, frame, wheels, and welds for
looseness, cracks, or other damage. Do
not use the dolly if there is a problem.
Do not over-inflate the dolly tires.
This trailer dolly is not designed for use
on the open road or highway.
Always make sure that the trailer hitch
receiver is fully connected and properly
locked to the ball hitch before using
this trailer dolly.
3. Disconnect the safety chains and the electrical
plug from the towing vehicle. Then move the
dolly next to the trailer receiver.
•
•
4. Adjust the wheel blocks so with the help of an
assistant you can connect the trailer receiver
to the dolly ball hitch and lock it in place.
•
5. Remove wheel blocks and use the dolly.
If you have any questions with your new trailer dolly, call our Tech Support at: (570) 546-9663.
COpyRigHT © OCTOBER, 2008 By gRizzLy inDUsTRiAL, inC. REvisED MARCH 2011 (JB)
WARNINg: NO PORTION Of THIS MANUAL MAY bE REPRODUCED IN ANY SHAPE
OR fORM WITHOUT THE WRITTEN APPROvAL Of gRIzzLY INDUSTRIAL, INC.
#CR11236 pRinTED in CHinA
|