Grizzly Switch G4672 User Manual

Model G4672  
Magnetic Switch Instruction Sheet  
 
 
 
 
 
 
��  
 
��  
 
Electrocution or fire could occur if this switch is  
not installed by a qualified electrician!  
 
�  
�  
MAGNETIC  
SWITCH  
 
ASSEMBLY  
 
 
 
 
 
 
Contactor  
TECO  
CN-16  
 
 
 
 
 
�  
(220V Coil)  
�  
�  
 
�  
 
 
Thermal  
Overload Relay  
TECO  
�  
 
��  
 
 
�  
�  
RHN-10K  
(5.5-8.5A)  
�  
�  
�  
 
IMPORTANT: This magnetic switch toggles a motor ON and OFF, and helps  
provide thermal overload protection for the motor if operating temperature  
gradually increases due to heavy work loads. The thermal overload relay inside  
is not designed to cut power in the event of a sudden motor overload or stall.  
�  
�����  
To help protect a motor from this type of overload, this magnetic switch MUST be connected to a properly sized  
power supply circuit with a correct fuse or circuit breaker.  
OPERATION: The green push button switch allows current to go to the magnetic coil which pulls the contactor  
closed. Main current now passes through the thermal overload relay and then to the motor. This relay monitors  
motor current draw. If the motor begins to overheat, this relay breaks the magnetic field, which opens the  
contactor and cuts current to the motor. The red push button breaks the magnetic field, which opens the  
contactor and disconnects the current to the motor.  
 

Grizzly Staple Gun H2909 User Manual
Grundig Radio Sonoclock 890 WEB User Manual
Hach Sander 3650 ATEX User Manual
Hamilton Beach Convection Oven Countertop Oven with Convection User Manual
Hamilton Beach Oven 31160 User Manual
Havis Shields Work Light LED Gooseneck Map Light User Manual
Hotpoint Refrigerator HMB313I User Manual
HP Hewlett Packard Laptop 333953 001 User Manual
HP Hewlett Packard Welding System 11667B User Manual
Husqvarna Snow Blower 8527 STE User Manual