MODEL G5346
1
⁄
2" AIR IMPACT
WRENCH
INSTRUCTION SHEET
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EXPLOSION HAZARD!
Never exceed 120 PSI!
Figure 1. Model G5346.
Introduction
Quick
Connector
Quick
Connector
Lubricator
Regulator
Delivering 7000 RPM and a maximum torque of
230 ft/lbs., this 1⁄2" Impact Wrench is an excellent
choice for anyone seeking professional qual-
ity and performance. This pressure adjustable
wrench offers forward and reverse at you finger-
tips and rubber bumpers for protection. Sockets
not included.
Your
Tool
Air
Compressor
Quick
Coupler
Quick
Coupler
Air Hose
Filter
Figure 2. Installing your tool.
Inventory
A. Air Impact Wrench...................................... 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in Figure 2. Otherwise, lubri-
cate daily with a couple drops of pneumatic tool oil
directly into the air fitting as shown in Figure 3.
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8045 PRINTED IN TAIWAN
|